Traemo

u/Traemo


r/ABDL•

I will be attending my first CAPCon in 2026. I have a few board and card games that are relevantly themed (Stuff Fables, for example). I've worked and attended numerous conventions before this, but those were all Gaming or Sci-Fi centered, so I don't feel like I've got a actual feel for will be happening in the slower/quieter moments this convention.

So, the questions becomes is it worth it to bring a few games with me to CAPCon? Are there likely to be table available where I could set up the games to play? If I do, is it likely that other attendees will play as well?

As always, thanks for you time and thought.

144


r/minipainting•

I've been working on a GW T'au Hammerhead tank recently, but I'm getting peeling and chipping in small spot, mostly at corners.Before I started, I washed and cleaned the affected pieces with isopropyl alcohol and rinsed with water. Handling them entirely with gloves, I primed them in Vallejo Gloss Black Surface Primer using a 0.5mm needle at 25 PSI, then let them dry 48 hours. Next, used the same airbrush set-up to apply two base coats of Vallejo Shifters Electric Blue Intense Violet 12 hours apart. After allowing the second coat to dry for 24 hours, I applied a coat of Liquitex Professional Matte Varnish, then let that dry overnight before handling the pieces without gloves.Despite the ca

16

r/minipainting•

I'm going to consider these done, for now. That said, I know there are things I could have done to improve the end result.Honestly, not quite sure what else is needed for good feedback . . . .

Pictures
edited: added new link

33

r/minipainting•

I'd like to be able to take better photos of my minis, mostly so I can get better feedback on how to improve them.
So, I was thinking, what if I took a medium size cardboard box (18" x 18") and sprayed the inside with gloss white paint? Could that work as a decent, low-cost way to get more diffused light and better pictures? If not, why not?

As always, thanks for your thoughts and help

21

r/Warhammer40k•

Painting a FunkoPop C&C

Hobby & Painting

Finally got around to working on the blank FunkoPop GW Space Marine, decided to do it up like the Chapter Master of my Custom Chapter. Mostly trying to figure out how to make it . . "pop" a bit more, but general feedback is also welcome.
thanks

00

r/minipainting•

Condensed backstory: the army in question is almost doubling in size, the existing units are all schemes based on Incubi Darkness. Since there will be a larger number of models I'll be painting, I'd like to try and do the basing with my airbrush. Things I've tried: thinning the actual Incubi to airpaint consistency and searches for existing colors that are close matches (possible solution: Vallejo Scurvy Green thinned).
My experiments/attempts thus far to thin standard Citadel paints have thus far been almost entirely poor results. I attribute this largely to the difficulty of getting a consistent amount of paint out of the pots, so it's possible I'll have better results with something in

22

Not sure how widespread this is; for the last two days any time I've attempted to start a battle, the game just flat out crashes. I've tried reinstalling the app twice, restarted by device, and confirmed I have the latest update to the OS installed.
Is anyone else experiencing a similar issue? Have a even a partial solution?

55

I've tried and I've tried, and I've tried some more - but I can't figure out what actually determines how many points you receive for the Missions. Nor could I find any explanation.
Anyone know this one?

55

r/Nighthaunt•

The intended use is to use the Chainrasps as either objective holders (backed with a GoS for regen) or a way to tarpit/occupy critical enemy units. The Shroudguard with one Spirit Torment are for popping up either in the back of the enemy lines to target heroes/critical units or to strengthen control over a specific point on the battlefield.
Since the Dreadblade can teleport, I can use that and the command ability to drop a unit on an objective. Could also use From the Underworlds to occupy a second by the end of my first Movement phase.
Magic wise, I'm sitting on looking at three caster (2 GoS, General), although I'm considering swapping out the Knight on Steed for Reiknor; that would b

41

r/minipainting•

I lucked into acquiring a set recently. It seems likely to me there's probably some less than obvious issues with actually painting these pieces and was hoping the community could provide some heads up on potential issues before I got started.
One thing I am sure of, I'm going to need a lot of paint.

00

r/Warhammer40k•

I recently managed to acquire 2 sets of the 2'x2' tiles. Since they're both much larger than anything I've done up to this point and possibly the result of a slightly different manufacturing process than the usual models, I wanted to get some feedback from the larger community before I start in on trying ti paint them.
At the moment, it's all just generalized concerns (and an awareness I'm probably going to go through paint like candy. On the other hand, it seems likely there's a few gotchas I should be aware of beforehand.

33

r/adeptustitanicus•

One of the Seneschal traits in Defense of Ryza gives the Seneschal's Banner +1 Strength to all weapons without the melee trait at the cost of not being able to charge or full stride. Which would make the Avenger 8 Dice of S4 Rapid shooting.
So, like it says, in light of that what's the thoughts about taking Avengers to strip voids?

913

r/airbrush•

. . . at least that's what seems to be going on. Frankly, the combination of issues has me baffled even after a few hours searching the internet for help.
Specifically, I have to stop and clean the nozzle/tip about every five minutes, which works out to probably about three or four minutes of actual spraying. In an effort to reduce that problem, I've been adding increasing amounts of thinner and flow improver - which hasn't really helped the tip dry issue but has resulted in poor coating (runs instead of sticking).
Additionally, now it seems the paint is dripping off the nozzle. When I stop to clean the tip, there's almost always an accumulation of wet paint in the bell (can't recall the

511