TwoHands

And for the other side of the court gate, on this hand and that hand, were hangings of fifteen cubits; their pillars three, and their sockets three.All the hangings of the court round about were of fine twined linen

I have a Kenmore 500 direct drive. Fills, advances, and drains fine, but spin and agitation stopped working and a whining noise started.

I open it up to check the various couplings that I've seen online only to be met with a motor shaft that is rounded on the drive end. See photo.

Can the motor shaft be replaced or do I need a replacement motor?

Thanks in advance.

I've been experiencing odd crash issues. system would just go black & restart out of nowhere, happens with random timing & with no relation to what I'm doing. Happens when idle, or active, or gaming, It even happened while running Memtest86 as I was trying to diagnose. And think I finally came to a conclusion.

After swapping out power supply and memory with no luck I ran the system without a video card and it still crashed. CPU is still in normal temp ranges so I'm thinking that narrowed it down to the motherboard.

The problem is, a new copy of my mobo is more expensive than when I originally bought it, and I cant find reliable reviews for the reasonably priced ones that are comp

Win10 PC. Appears to randomly cut power & reboot, no BSOD. Can be while gaming, browsing the internet or doing nothing. I've disabled "reboot after hardware failure" but it still does this.

System details:

CPU: Intel Core i5-6600 (Skylake-S, R0) 3300 MHz (33.00x100.0) @ 800 MHz (8.00x100.0) Motherboard: ASUS Z170-A BIOS: 3802, 03/15/2018 Chipset: Intel Z170 (Skylake PCH-H) Memory: 8192 MBytes @ 1400 MHz, 16-18-18-36 - 8192 MB PC22400 DDR4 SDRAM - Patriot Memory (PDP Systems) 2800 C16 Series Graphics: ASUS STRIX R9 390 DirectCU III OC AMD Radeon R9 390, 8192 MB GDDR5 SDRAM Drive: SanDisk

Buying 2 Nanoxia Deep Silence 120mm PWM Fans to put into a Enermax Fulmo Q case. I've got the Asus R9 390 cutting the case in half in the middle.

Should I mount one to the top and one to the front? (case has great front ventilation and some fan mounts apparently), or both to the top corner? (case has 2 spots up there, one facing up and one facing backwards).

Case came with one slightly noisy fan mounted high in the back.

Heading out for the day with a plan of going to Fry's and having them price-match the lot of this stuff (in several hours). I'll probably have to make a minor substitution or 2, so i'll update later with what happens.

I'm still open to advice at this point as I'll be using this post to show the Fry's people what my parts list is, so I'll be checking it later when this post is like 6 hours old or so.

Special Thanks to u/JonBaa for his help refining this a bit. Saved me around $50 and convinced me to go with an IPS monitor (my current build still has a TN panel in the list. I figure I'd leave it for the sake of having something there); I'll look at options IPS options at the store.

(Ever

###Build Help/Ready:

I've always loved pc gaming, but have had to tone it down for quite a while due to lack of funds. I'm still rocking an old Asus A7k laptop and Vista (boo) and have been using it virtually daily since it was new to the market. No parts failures or replacements. I've still been keeping in with smaller games like Binding of Isaac (love the afterbirth greed mode right now), but even they take their toll (before Rebirth, Flash-based Isaac wouldn't run cleanly sometimes on this thing).

So now i've got some money to spend on a system to last me until after the PS5 comes out. My laptop's usability and durability have won me over into the Asus fanboy camp, so i've chosen a f