VanGoghComplex

u/VanGoghComplex


r/unRAID•

I have two Unraid servers, and my PiHole and Nginx Proxy Manager lives on one.

I would like to use the unRAID Replication plugin to create "high availability" for both of those services. I've got the master / backup relationship established and successfully replicated the master server's containers to the backup server.

However, for the secondary server to actually start those containers on failure of the master, it seems a keepalived configuration is required. I'm pretty unfamiliar with a lot of this, and the tutorial documentation for the plugin seems to assume that all your containers are using the host's IP, and thus instructs you to create a single virtual IP in keepalived.

My PiHole

20

r/Tailscale•

Bear with me here, I'm drinking from a firehose and only sortof understand this stuff.

What I've done:

- Registered my domain at Namecheap
- Set up DNS for my domain at Cloudflare (for the API access to generate a cert)
- Pointed the domain's A records at Cloudflare to my Nginx Proxy Manager's Tailnet IP
- Set up Proxy Host entries for my local devices and services with a Let'sEncrypt cert

When the Tailscale client on my machine is running and my domain resolves to that Tailnet IP for Nginx, everything works beautifully. However, I've kinda made myself dependent on Tailscale for it all to work, and Tailscale breaks some things on my main desktop PC. I want to figure out a way to

107

r/PS5•

I have some games my kids play. I've bought some games specifically for my kids, as well. I have to put in a password for them to use the console, all well and good. However, due to some of the content, I do not want them to have access to the Playstation Store.

Barring that, can I create them accounts for them, lock the store in those, and allow them access to the games I've purchased for them?

I know part of the right answer is "you shouldn't have bought those games under your account," but try as I might, I can't get ahold of past me to get him to correct his error.

04


r/popurlitterbox•

Had our Popur for a couple weeks now. It is in many ways a superior machine to the Litter Robot 4 it replaced, but there's one significant flaw I'm hoping you all can help me with.

It's good at odor control while it's idle, but every time it cycles and fans open that stinkflap, it fills the room with the stink of sour poop an ammonia. I'm really not sure what I can do to fix this, as it seems like it's just part of how the machine works. Anyone got any tips?

21

r/SatisfactoryGame•

If I have a rail system, I want the straight sections to be straight.

For the straight sections to be straight, the rail must lay on foundations.

If I must build on foundations. I want to build on the world grid.

I cannot for the life of me find any way to build curves in tracks that re-intersect with the world grid elsewhere. 45 degrees is bust. I found a very popular thread earlier explaining the 3/4/5 rule, but I cannot get a straight section of track to snap like the tutorial shows. I'm at a point in my game where I need to use rail to proceed, but every time I load it up, I just fiddle unsuccessfully with the point where I want my world grid train tracks to turn ~45 degrees and then

015



r/watercooling•

In the past, I've always rewired my D5s to run off an Aquaero 6LT header. This way I get power readings back in addition to tach. It's worked through multiple builds - the Aquaero 6LT has 30w headers and is capable of supplying the 20w a D5 typically pulls. This one's got me stumped though.

It's a Lowara D5 that I purchased second hand, and I have verified that it works by running it off my 12v bench PSU. Said PSU is actually powering it now, as I write this post. However, whenever I plug an Aquaero channel into it, three things happen:

-The pump does not turn.
-The fans, if plugged into the other of two channels I'm using, slow or stop.
-The reported voltage at the header drops.

17

r/techsupport•

Hey all - I'm stumped on this. I'm serving an application via RDS that is designed for 1080p screens and doesn't scale cleanly at all. In spite of everything about the RDS session being "set" at 1080p, that app was still doing some weird and unpleasant scaling.

I went digging and landed on a Powershell command to show the current screen resolution, and it returns that the resolution is 1925 x 982.

Does anyone know what's causing this, or how to force it to be the resolution I set it at?

10

r/FocusST•

Hey all, got some parts I'm looking to sell but I see rule 1. I've been out of wrenching on cars for a little over a decade and haven't really done used part sales at all. Apart from your local FB marketplace, is there anywhere you go or any services you use to sell parts in good working order?

14