Whatdoes42mean

u/Whatdoes42mean



r/testicularcancer•

Almost two years ago I had my right teste removed for squamous cell carcinoma.

Three rounds of BEP. I had just turned 50, weird I got TC so late in life! Three rounds was rough. No lie. Had all the fun effects, hair loss, weight loss, high frequency hearing loss, pretty fun neuropathy in my feet, skin rashes and constant vision changes during treatment, etc…

Mostly recovered, except hearing aids are my friend, and my feet hurt a lot, but my hair came back in beautifully! Nice and thick, a little more grey, but at least it was nice and I was here to appreciate it!

A year ago ( one year after treatment), the whole crown of my head went about 50% thinner and is thin and crispy.

Other th

59

r/HelpMeFind•

I remember this thing from the mid to late 80’s.

It was a car, maybe 7-10” long.

It was white with black trim.

To me, it looked extremely similar to a Saab 900.

It was a multitool for desk tools.

The bumper pulled out to reveal they were scissors.

One headlight popped out to reveal a pen. The other was a pencil.

I also recall a hidden ruler, and tape dispenser, a mini stapler, maybe an eraser?

Anyone else know what I’m talking about?

12

r/Victron•

This is going into my Coach Conversion (Big Bus!)

I’ve got 3100w of solar. Through 4 victron Mppt’s.

600ah of 24v lead acid ( getting lifepo4 soon)

Cerbo and gx70 screen is on its way.

I’m looking at getting two Multiplus units beginning of next month.

Which one though? Multiplus-ii 24v/3000/120 OR Multiplus-ii 24v/3000/120x2

???

I have a larger A/C panel, 200amp, I think. I wanted it for the “extra” slots and to have a “main breaker” shutoff handy.

This panel has two feeds to the individual breaker slots.

What’s better? Two multiplus-ii 24v/3000/120v , paralleled together, then join the A/C bus bars in the panel together? This seems good, full amperage to both “legs” in

112

r/autism•

When you mask, are you able to do things you normally wouldn’t/couldn’t do normally?

For instance, I hate being dirty, especially anything slimy, but if I’m masking as a blue collar mechanic person, I can walk through mud and get oil/grease on my skin and not freak out.

Is this a thing?

61

Morning Stiffness and the rest of the day…

RA day to day (tips, tricks, side effects)

Howdy all.

I’m wondering how morning stiffness affects everyone else.

It takes me about an hour, sometimes longer, to get loosened up enough to start the day in earnest.

If I take that hour to “warm up” , the rest of the day is is usually okay.

However, if I crawl out of bed and immediately get going, you know -push through the pain, I’m stiff and sure the rest of the day.

Does it work that way for you all?

1312

r/dieselheater•

I have a Coach that I’m installing 2-3 units in.

I’ve already got one installed and running great on the supplied fuel line. I used the whole 3 meters of hard line.

I would like to use a fuel line that is easier to get ahold of then the supplied stuff.

I noticed that my Coach used 1/4 hard air lines for a lot of things, that airline says it’s rated air and fuel.

The ID is large on the 1/4 OD air line, but I found some 5/32 line with a ID of 2.5mm

It is rated for 120psi and is very hard, while still flexible enough to route through the rig.

I think it would make a good run for the rear heaters, seeing as I’m using the onboard 215gal diesel tank!

Any thoughts?

26

r/arduino•

I’m trying to setup a wireless system to turn on/off some battery operated lights that are hung up in various locations. Think those battery operated Halloween hanging lamps

I was trying to figure out a WiFi/bluetooth answer, then I stumbled across an infrared diode setup ( like what is in your TV remote ).

I’m thinking a nano with a relay board and I’d be set.

Am I in the right track?

I’m thinking I would operate around 4 of these lamps with a Raspberry PI? There would be a fair amount of if then statements to tell them to turn on and off , which is why I’m complicating such a simple thing!

210

r/dieselheater•

I have a Coach with an onboard 235 gallon tank. I made a little manifold that is attached to an extra draw tube.

I have two heaters attached at the moment, will have a small third attached soon.

My issue is this: the heaters will run for days straight, if needed, but if I turn them off for a couple of days, the fuel from the section side loses it prime.

I’m thinking a check valve would be a good idea? Between my manifold and the draw tube.

Anybody done this? Heard of it?

Thanks!

22

r/SolarDIY•

Howdy All!

I’m looking at getting a whole bunch of Victron equipment at once. A few inverters, some Solar controllers, etc…

I currently have Amazon Prime , I’ll be looking around for a different place to get needed stuff shipped to me. I live in the back ‘40 acres of the US. Just popping out to get supplies could be a two day affair! lol

There are no dealers listed on the Victron site anywhere near me, I would truly have to take an overnight trip to go get stuff in person.

I like that I can get everything I need from one shipper, I have some serious anxiety with life, one shipper relieves that stress. But now, I’m stressing over the idea that if I get my Victron equipment from Amazon,

216


r/SolarDIY•

If a MPPT is rated at 100/50, that means it’ll take up to 100 volts into it. Yes?

Then, here’s where I get confused. If it says 50amp, that’s at 12v. That means, up to 600 watts in solar panels, yes?

But, if I change to a 24v system ( inverter and such ), this means I can hook up twice the panels? For 1200 watts into the controller?

I presume that would halve the amps going in to the batteries? Double the voltage/ half the amps. Yes?

Just checking to verify that a 100/50 will take 1200 watts off panels to a 24v battery pack.

Thanks!

68

r/skoolies•

I have a 1994 Thomas WestCoastER ( a factory version of the Saf-T-Liner built for the high temps of the west coast )

I can only find the factory sticker up by the entry door. It is faded pretty badly.

I’m looking for a place to start looking for the vin on the Frame/Body and possibly a place to get a replacement sticker?

I really want to remove the factory overhead storage and make a new upper cabinet to fit the new RV interior we are building.

I can’t do that if it’s the only vin location.

Thanks!

11

r/dieselheater•

I have a 40ft diesel pusher RV.

I installed two diesel heaters.

Since I have a hundred gallons of diesel on board, I would like to install a standpipe in the tank and feed both heaters from one source.

I have one heater installed approximately 15feet away and one is maybe 25feet.

I estimate a maximum of 18 inches of height to get the diesel out of the tank, then it’s downhill from the top of the tank to the pump itself.

Is this too far for the little pumps to suction the fuel?

12