_Tim-
u/_Tim-
I recently switched to Wayland and wanted to play osu for the first time on it.
First thing I noticed, my area was gone, so I tried to set it up correctly and noticed...the options are a massive downgrade from X11 to Wayland.
Is there a reason for this?
It is not even possible to accurately choose your tablet area, it is just in percentages and really badly made (by dragging and the help text overlaps..). The options to change "sample rate" and "suppress rate" are gone, too, as well as profiles.
Even calculating my area percentages from my original one (12000/15200 = 79% * 6750/9500 = 71%), it feels way off.
I am not sure if this is the right place for this, but whatever, this needs
I recently switched from uBlock to Adguard at my workplace due to MV3.
The user rules I had created for reddit are not working with Adguard and the company firewall reports to the IT department, that I visit illicit websites.
The user rules are as follows:
||redgifs.com^
||*.redgifs.com^
Other variations I had tried:
||redgifs.com^$all
||*.redgifs.com^$all
||redgifs.com$all
||api.redgifs.com$all
I cannot even find these requests in the filtering log, which is quite weird.
Perhaps Adguard is just that late in intercepting the traffic, that it reaches the company firewall before it reaches Adguards Extension?
All in all, uBlock was able to block this with ease
I have this weird issue which happened after I installed Fooyin and set it to use pipewire.
Afterwards, many other audio applications just reduced in volume and I have no clue why.
I tried checking alsamixer (which shows nothing, since I use HDMI sound out), resetting pipewire configs, changing the rates and so on.
What is weird, if I test it on a video, the volume is normal. If I use the same player on an audio file and switch between pipewire and pulse, it also changes max volume.
Here is a video of this behavior: https://drive.proton.me/urls/027JKA8RS4#eGzIVMvlQgoh
I'm at my wits end and maybe some of you have an idea why this happens and how to fix it. Definitely doesn't seem like n
Heya,
I'm trying to get CS2 to run well on Wayland, but the game feels like it is stuttering, or syncing incorrectly/skipping frames.
Maybe it's visible on this video: https://www.youtube.com/watch?v=MWmmeKEgGvA
I use two monitors with different refresh rates, 144 and 240. Disabling the 144 Hz and playing with the 240 Hz one only doesn't seem to fix the issue.
Other things I've tried:
- Enable/Disable VRR
- Enable/Disable tearing for fullscreen applications
- lowering fps below refresh rate (alleviates the issue, but it's still present)
- using only one monitor
- changing export SDL_VIDEO_DRIVER=x11 to =wayland
- removing export SDL_VIDEO_DRIVER
- removing all launch options:
Heya,
some days ago I got around to compile and install wine + dxvk with a friend so I can play a fairly old game (Call of Duty 4).
It runs, but it suffers from heavy framedrops. (constant 250 fps are needed and it dips down into 120s)
From what I could see, the effect is stronger the more players are around me.
So, after playing around with winetricks and different dxvk-versions, I gave proton a try and weirdly enough, it doesn't have that issue. It's rock stable at 250 fps, no matter what.
My question would be, what is the key difference between proton and wine?
Am I missing some crucial option on wine, or is something interfering with it somehow? I'd really love to get it wo
Hello,
I recently switched to Linux as a first timer and feel comfortable on here, nearly everything works and I'm overall happy with my experience.
Thing is, for some apps my volume randomly changes itself after several reboots. Both CS2 and Telegram come to mind.
For CS2 I usually do 100% and after a reboot it's at 58%, for whatever reason.
For Telegram it's the opposite, I have it at 50% and after some reboots (this is not consistent) it's at 70-90%. Also, for some reason it reset itself once, but that's not part of my question, but if someone can explain why I'd be happy about it.
As for my system:
Latest Arch with default Kernel
Latest stable KDE with pipewire, using rootless X
I just updated my BIOS on the 4090 Gaming OC after installing the Gigabyte Control Center, since it's only available there (why...).
Well, the Silent BIOS didn't get detected as silent and it just installed the normal one.
Is there none or did I do something wrong? Why aren't they listed on the website (both on aorus and gigabyte)?
I just hope this at least fixes the revving issue this card has. Gigabyte has seriously been a tough ride (got an x670 board from them) on this build, which took me quite a while to figure things out, since nothing works as expected...
Heya,
I just noticed that, when I set anything from 1.22V to 1.15V on my Gigabyte X670 Gaming X AX with a 7800X3D, it always shows 1.2V on SVI3 TFN (CPU reported vsoc), while on the other hand, the mainboard reported vsoc changes quite a bit (1.224 with BIOS 1.19 and 1.176 with 1.15V).
So well, my question is basically, why does one change and the other doesn't and does it make a difference at all, since the CPU still seems to get its 1.2V no matter what.
Hola, I have DDR5 6000 32-38-38-96 RAM and issues getting it stable at 6000 on a 7800X3D, especially with newer BIOS versions. (Running at 5600 CL30 right now, can't get it any lower)
That's why I want to buy new RAM, see if it's my memory controller and if not, sell the old one.
I'm just stuck between two different kits and want the theoretically "better" binned one for a higher chance of getting better timings.
Either:
F5-6000J3038F16GX2-FX5 (G.Skill Flare X5) 6000, CL30-38-38-96, 1.35V
CMH32GX5M2B6000Z30K (Corsair Vengeance) 6000, CL30-36-36-76, 1.4V
There's a G.Skill kit with 30-36-36, 1.35V as well, but sadly it's not easily available in Germany.
Which is the better optio
Hola,
I'm looking for a lighter I lost some years ago.
From what I can remember, it had a pipe as a logo, it was golden, the cover would enable the gas, there was a roll on the side which would produce the spark and the flame came out slightly diagonal.
From my search I came to find the Sarome SD9 (or PSD9). The problem with that one is, the way you "reload" the flint is different. Otherwise it looks near identical.
I can't recall how to change the flint on the one I lost and I assume it might be a discontinued product. But it's still bugging me out that I can't find it with that manufacturers name. So my guess is that it still
Hola,
I installed Floorp today to try it out and overall I'm happy with everything.
The only thing that's bugging me is that the tab bar is colored and I can't seem to make it dark at all.
I might be missing a simple setting, but everything I tried in the themes, as well as Lepton settings, I just can't get it dark at all.
Any help appreciated.
Just like the title suggests, if there's a number in the series title it won't detect the episodes anymore.
Example of a current seasonal show would be:
My Unique Skill Makes Me OP Even at Level 1
The episodes are named like this:
[SubsPlease] Level 1 dakedo Unique Skill de Saikyou desu - 02 (1080p) [0D846539].mkv
It just won't find/download the episodes automatically and I have no clue why or rather, how to tell Sonarr that it should only read the episode number after the dash.
The Release Profile is set up so that it only filters for "SubsPlease" currently, if there is something I can do to fix my issue with RegEx, then I appreciate any help, since RegEx is completely out of
