antmit

Quick question for people.

I've had an AW since 2015 (was it?) and in 2023 I got my first Ultra (2). Since the first watch I got with cellular, I've always really enjoyed being able to go for a run without my phone, but when I got the U2 I spoke to an Apple genius that doing things like going for a run, whilst running particularly third party apps like Audible, would increase the battery demand (naturally) and therefore increase the overall degradation of battery health / capacity over time. So, this is what I tried to do.

I had that U2 for two years, and I tried as much as possible to avoid using the watch solo when going for a run. I think when I sold it on, it was down to 92% capacity.

I had my U2 for two years, and despite several bangs and knocks, it was in 100% condition when I sold it to a friend. I did that because I got the U3 and in just two weeks, I've developed two imperfections. The first of which is along the top left hand corner, and it's almost indistinguishable so I'm not bothered about it. The second is shown here, and whilst I've angled the camera to make the most of it, it is noticeable.

https://preview.redd.it/nk8as1kdxftf1.jpg?width=3024&format=pjpg&auto=webp&s=678ff5a3f9fd076712e03dea84dc2396878f602e

Whilst I know that the Ultra series are designed to be used in more challenging environments, and the two incidents were quite severe and I'm lucky to o

I had my U2 for two years, and despite several bangs and knocks, it was in 100% condition when I sold it to a friend. I did that because I got the U3 and in just two weeks, I've developed two imperfections. The first of which is along the top left hand corner, and it's almost indistinguishable so I'm not bothered about it.

The second is shown here. Whilst I know that the Ultra series are designed to be used in more challenging environments, and the two incidents since getting the 3 were quite severe and I'm lucky to only have what I have, nevertheless I love these watches and so I wondered if anyone had any ways (trickery or otherwise) to better hide or 'repair' issues like this on

I am trying to pass CGPT a large amount of data, as part of an automated process, so that it can analyse it, based to the prompt instructions that are built into the assistant on OpenAI. I have so far tried Zapier and PowerAutomate, and keep getting stuck at the same juncture: information being too large to send / being unable to get a working method of passing this data in chunks properly. The data being sent is in several CSV files, and can contain a few thousand lines of data each. There is no way to truncate this, and I need all of the data to be present so summarising isn't an option.

Because OpenAI / CGPT apparently cannot accept or read documents in a meaningfully helpful manner, I'

Just reinstalled my phone and put things on it without really thinking about it.

Oh, I wish it had more going on. It’s still by far the best UI/X but if it had:

• Motion style, dynamic scheduling
• natural language
• more integration with other platforms

I’ve tried them all. TickTick, Todoist, Motion, Notion, Reminders, ToDo, etc etc etc. None of them feel like Things.

Anyone else feel the same?

Relatively new user of Tana here, and someone who's been in search of a system that automatically takes care of monitoring incoming information and creating - and scheduling - tasks as much as possible automatically, rather than going down the manual creation and curation method. Tana seems to come really close, and I love the unstructured nature of the system as folders and sections, for me, end up being more time-consuming.

I also love the meeting transcription system, but I have a few issues with it:

1. It has no differentiation between different voices in a face to face meeting, and rarely have video calls so even if it DOES do that there, I have no use of it. You just get a literal t

So a few weeks ago, I posted this: How to make my work process better (can't remember what I called it). TL;DR: I've tried many, and I mean MANY todo type apps and never found something that does everything because it doesn't exist. I also use Notion HEAVILY in my work life, and it's a shame in some ways that it isn't more usable on a mobile platform or with less project-management-y tasks, because it would be amazing to have ONE app.

Anyway, from this post I got a couple of suggestions about different apps, one of which being Tana. I must say, I love it. I love the AI voice transcri

I've only just today managed to get my M1 Max MBP running with Whisky for CS2. Everything at high detail and it runs like a dream (for anyone else in a similar boat or perhaps with a newer Mac). However, though I've tried adding the mods manually (creating the Mods folder in the game directory as per u/whiteswine post a few months ago. However, it looks like nothing is loaded, and just wondered if anyone had managed to get mods running OK with the Whisky approach in recent months?

I own a care company and I use data from our recording systems into a SQL database that, in turn but amongst other uses for it, then goes into PBI dashboards.

My issue though is that yes there could be header and detail scenarios, such as “people that are returned in this query” as a donut or other visual, but I also need to have tables showing that data, too, as well as tables showing text information from other areas of the system the data comes from (such as biographical data or areas where care is needed).

My question is how do you best manage a sensible balance between useful visuals and not overloading on tables of data? I feel there’s a lot of text on the reports I create, but alt

I'm finally looking at getting CS2 after always loving CS on my Mac. I have a couple of questions though:

1. I have an 32GB M1 Max MBP, so having to look at using my Parallels if I want to use it with any mods. What are the chances of getting a decent FPS in Parallels mode, even if I devote most of the resources towards it?
2. What is the difference between the standard £/$35 package, and the ultimate one? I've looked and looked, but nowhere really seems to offer a definitive list of what you can get with the ultimate, and what you strip out / avoid by just buying the standard plus the packs I actually want.

Hope I've got the flairs right this time...🙄

Used to love playing CS1 and then thought I'll get 2, only to realise that 2 isn't Mac-supported. Can't believe that's still the case 2 years later, but there we are.

My question though is that though I have Parallels, is it perhaps better to use GFN instead, or is Parallels the way to go? I have an M1 MBP Max.

Thanks.

Hi. Apologies in advance as this is a long post some might not get to the bottom of. I think I've written this out here as much about trying to understand my own difficulties as much as anything, but to give some background:

• I run a healthcare business as MD.
• I have built Notion to be integral to how we track many day to day aspects of that business. The sorts of things you'd expect Notion to do, really.
• I have a reMarkable tablet, and use this for things like interviews, meetings and occasional 'mindmaps' to think about new issues. I've done the Apple Pencil / iPad thing, but I found it too distracting in meetings or times when I'm trying to focus.
• I have many, many conversations

I have a rollup with a date in it (DD/MM/YYYY), and I want to compare how many months it has been since that date to now. My formula should be fairly simple, at least according to ALL the Notion websites that still seem to think you need "prop" included:

dateBetween(now(),Start Date,"months")

However, all I get is Argument of type array does not satisfy function dateBetween(). [18,19].

I'm clearly missing something obvious, but I just cannot find anything on the web that seems to do exactly this. Please help!

Hi. I'm just getting into the more advanced Notion formula stuff, and whilst I've made good progress on some things, on others I'm not quite there.

I have a matrix of dates, which are then referenced in a formula field that shows as a green, red or amber if the date is overdue, in date or due soon. Not all people in the matrix are subject to every column, meaning some therefore have N/A instead of a green, red or amber.

I want a way of getting a total number of green boxes, as a percentage of those fields that ARE applicable. In other words, some will be subject to more of the fields than others, but the percentage still needs to be generated.

Can anyone help?

Thanks