brokenhalf

Looking for some guidance. I have acquired a SE/30 that was sitting in a closet for nearly 25 years. When I first got it, it would simasimac, but cleaning the board of the build up of dust largely resolved boot issues. I was able to boot into the original 40MB SCSI drive. I was also able to boot off of an external disk drive, the internal disk drive needed to be lubricated and cleaned so I never attempted to boot off it before the recap.

After recapping C1, C3, C4, C5, C6, C7, C8, C9, C10, C12 and C13 with Tantalum capacitors the system would boot to a floppy icon with an X. If I connect a disk drive to either the external floppy port or the internal ribbon, the drive head will move an