callmerandy

u/callmerandy


r/hondainsight•

Is every lower control arm on the second gen insight aluminum? Or was that after the 2012 update?

Asking because I want your cool LCAs for my Fit.

11

r/MechanicAdvice•

I'll try to keep this short, I've run into a problem.

I set the valet lock on the trunk of my 2015 hyundai sonata. Big mistake. The only way to open the trunk when the valet lock is set is through a keyhole in the rear. I have the keys to the lock. The lock does not function. Not sure why, but no amount of persuasion has worked.

You may be wondering, just put the back seats down, duh. The only mechanism to put the rear seats down in conveniently located within the trunk, fixed for the 2016 model year.. Now, the only ways to get in is by removing the rear seats, or defeating the rear lock. You Know why I'm here.

What could be wrong with the lock?

How can I go about defeating the lock?

11


r/Wheels•

Looking to slap some NF sonata 5 spoke wheels on a 2012 civic. Bolt pattern, wheel size, and offset are good, just had a question about wheel hubs. The stock civic wheels have a hub bore of 64.1, so can I assume that they're flush with the vehicles hub bore? If that's correct, then the 67.1 bore wheels should go on just fine with proper rings?

Any knowledge is appreciated.

10

r/EDH•

I'm building my first stab at slivers in edh. I'm going for a more traditional route of playing slivers and then playing more slivers. I'm having some difficulty making the final 10 or so cuts.

https://www.moxfield.com/decks/CGmqgC4E7EOI7Y2NRoYAng

I've already cut a ton of cards (moved to Considering on moxfield) and it's difficult to remove more. I currently have ~50 creatures, all but one is a sliver and I know the recommendation is 40 to 45. I can't bring myself to get rid of more slivers.

If there are any glaring cuts or glaring additions, I'd love to hear it.

Thanks in advance, I'm ready to jive with the hive

10

r/hondafit•

AC Question/issues

2nd Gen GE/GG

09 Fit, US, When I picked up the car about a week ago, the AC worked well, considering its a fit. Drove the car at 3-4000 rpm for about 5 hours with the AC on. After about 3 hours, it stopped being cold. I've read that is to be expected.

The AC has not been cold since. I'm assuming I should just recharge it, but I wanted to ask the congregation of Fit homies.

15

r/hondafit•

I'm looking to get another daily, and the Fit seems perfect. I just need reliable, cheap, and fun. I've found a 2009 US spec Base Fit with 120k miles. MT of course.

I'm looking to see what kind of knowledge I can get. Common issues, what to expect, good ideas for preventative maintenance, OEM+ mods, etc.

I'm not sure what kind of mechanical condition the Fit is in, I'm planning on having a shop inspect it before I buy it.

510