cblte

I’m encountering an issue while trying to connect to my home network using a Cloud Gateway Ultra (CGU) with Teleport enabled.

In my setup, my ISP’s router handles the internet connection, while the CGU is connected via a static IP on its WAN port to one of the router’s Ethernet ports. When I initiate a Teleport connection on my iOS device over cellular, it works seamlessly. My cellular provider (KPN) assigns an IPv6 address, while my ISP only provides IPv4 for the landline connection. Despite this, the Teleport connection on iOS functions perfectly.

The problem arises when I attempt to use the Teleport functionality on my MacBook via the Wifiman app for macOS, using my iPhone as a hotspot.

https://preview.redd.it/ji5gj2gxy08e1.png?width=1299&format=png&auto=webp&s=573889a52e75bd0b478b6e4a5e53ee2ce0b68ae9

This is my current base. I am on Vulcanus und Fulgora and about planning to go to Gleba. I am not sure if I should first do some reorganization of my current base on Nauvis into a more city block'ish thing, as I have attached some robot crafting things here and there. Things that do not fit into the mall/hub, etc. Like getting a bit more organized.

I know that this is quite an opinionated question, but maybe you have a pro or contra argument.

Thank you.

Hi everyone,

I'm planning to upgrade my home network setup and would love to get some advice. Currently, my network is a mix of TP-Link, Netgear, and a few no-name unmanaged switches. I'm looking to replace it with Ubiquiti devices for better performance, management, and scalability.

Here's my plan:

• Ubiquiti Gateway for routing
• Switch Lite PoE (8 ports) on the ground floor
• Two UniFi Access Points (U6+ or similar)
• PoE Injector for one AP on the ground floor

The layout planned so far:

• On the ground floor, I'll have the gateway, and one access point. I also have two wired devices (TV (which can do WiFi, AdGuard Home on a raspberryPi, VideoDoorBell Hub) that ne

Hi there. I am seeking for some hints and comments regarding a better or different way to organize things. And no, please do not recommend Filing Cabinets, they are a ticking timebomb. Thanks.

This here is my current one after playing SF4 for the first time https://imgur.com/a/UEhm5Jm

https://preview.redd.it/uxqh85hl0fjd1.png?width=2560&format=png&auto=webp&s=8ed289266ed5d873766ba61f049d065fabf3aeca

https://preview.redd.it/u6njsr6m0fjd1.png?width=2560&format=png&auto=webp&s=dd13285c218f4f58a5d3ec763bbdf31e2bed8ec9

https://preview.redd.it/ut24c7pm0fjd1.png?width=2560&format=png&auto=webp&s=562e0dfd316630683f1b3235410fafaaac085e27

I have Bons

Hi r/homelab,

I recently purchased a Minisforum HM90 mini PC with high hopes of setting up a home server. Unfortunately, despite extensive troubleshooting, I can't get it to power on. Given this setback, I'm in search of a reliable alternative.

Here's what I'm looking for:

• A mini PC that can accommodate at least one additional SSD, though two would be ideal as main storage drives in a Raid1

• Low wattage consumption to keep energy costs down.

• Sufficient power for running multiple Proxmox virtual machines.

If a mini PC with two SSD slots is not available, I'm open to one that supports just one SSD. In this case, I'm considering storing regular backups or even some of the planned P

Hi there. I am printing a fiberlogy PETG at 240 degree with 80 degree bed temp.
At normal or at slow speed, when printing the filling structure. It creates a little mess with lots of bts and pieces loose.

HELP?

https://preview.redd.it/rg2ro4f16uhc1.png?width=816&format=png&auto=webp&s=81f54a7101f3a815b098694cdb1413b8c28602ae

Hello everyone, I am desperately looking for the old box. I do not like the new crystal one, and I think they are overcharging customers here. New model, whatever materiel, I don’t mind, and less things for 25% price increase. I do understand the „crisis“ and that everybody has to charge a bit more, but this seems to me like a new-customer-profit-maximizing-ripoff.

I am grateful for any hint where I could buy an old box with the opaque AeroPress anywhere within Eurpe (prefeably NLD, DEU). Thank you.

Hello everyone,

I am struggling a bit with myself at the moment. Not that I feel left behind, there is plenty to do, and with a re-arrangement of my crew I was able to get the Talla over 16k in strength. But it feels slow and cumbersome and not so smooth.

I am fresh OPS15 with 7 day shield, have you bought the 60 euro package for the Jellyfish this "late" in the game? Is it still worth it?

My Talla is T5/7 at lvl 21. Would it still make sense to get the Jellyfish or should I wait for the Northstar that everyone is recommending?

Looking for players who have bought it in general and can tell me about their experience and crew.

Thanks in advance!

I was trying SN self-hosting today and after activating the pro user on my localhost instance, I set up the whole thing on my NAS. Luckily, for whatever reason, the macOS SN client gave me all the features. Even without the offline subscription code. For whatever reason.

Installing everything on my NAS was a bit more difficult, but I finally managed to use the macOS app to create an account and also to upgrade to Pro user via the Portainer console, which was immediately reflected in the app via the popup.

Side note: the Electron macOS app is super clumsy to use during the login or registration process. When I entered my details and clicked the Advanced link to set the self-hosted server,

Today we received a letter from KANTAR for the NMO - the Dutch #NationalMediaOnderzoek - the Dutch way of paying 120 Euros in BOL vouchers to spy on your internet traffic at home, all traffic on your smartphone and to track your TV consumption. Your data is only worth 120 euros to them.

There is a video on the site that explains the spying on the user's home very well. https://www.nationaalmediaonderzoek.nl/english

Because everyone really hates cookies and spying, they don't try to hide it anymore, they just want to buy the stuff directly from you.

Did anyone else get such a letter? I hope nobody wants to participate. This is so privacy in

Hi there, my prints are fine, and I am happy with the results I get, but this pause at height thing worked once and now it seems to not work at all anymore.

My Ender3 v2 neo runs on stock FW 1.1.4 and I am not sure if I should update to 1.1.7 (https://www.creality.com/pages/download-ender-3-v2-neo?spm=..page_1934481.products_display_1.1&spm_prev=..index.header_1.1) to help to get this fixed.

​

TL;DR:

Slice, check layer, add script, save to disk and load G-Code into Octoprint.

At the layer, the print head moves up 1 mm, to the side and then 15

​

https://preview.redd.it/zjhc8g80mpta1.png?width=1920&format=png&auto=webp&v=enabled&s=6e991ce64b8f70bf0ae6c31e2e8ef4130b0b42ce

After about 3 days playing with SD, I tried some prompts for landscapes instead of portraits. This came out very nice. Still learning how to scale up and create detailed, sharp images.

​

Prompt:

best quality, masterpiece, beautiful wild and natural fantasy landscape with glowing lights, best quality, top quality, clear image

Negative prompt:

lowres, easynegative, bad-hands-5, [negativebs:0.2], (low quality, worst quality:1.3), worst quality, blurry, low quality

Steps:

Steps: 40, Sampler: DDIM, CFG scale: 7, Seed: 2826698860, Siz

I was working fine yesterday evening through remote connection. For about 4 hours. This morning, I cannot connect via remote desktop anymore. Browsing files and also transferring files at up to 5 MB/s still works fine.

https://preview.redd.it/86lloeg8dmta1.png?width=326&format=png&auto=webp&v=enabled&s=d54cbaa45ecf57e434eb4ccffe41c9a96747d3ea

Sometimes I get the information: "Waiting for Image" and sometimes I have the options to switch to screen 1 from the File Browser session.

Any Ideas on how I could get access again to my Windows pc at home?