cool--

am I losing my mind? I'm trying to play the witcher 3 remaster and it's not allowing gamepad and mouse simultaneously.

but I have an old steam controller config that I've used for 160 hours....

was there a trick to getting it to work or did it get removed? did I imagine the whole thing?

For years it was this sub but that seems to have gone out the window with no hope of returning back to normal.

Is there another place on the internet? r/steaminput was banned a day ago, probably because it was dead. Is there a discord or forum somewhere?

Is it possible to bring back r/steaminput?

Size of the pads: If you're used to playing with only the pads on the old controller you're probably used to higher sensitivities and moving your thumbs just a tiny bit to make big sweeping turns. If that sounds like you, you should know that the smaller size of these is not a big deal. binding buttons to the edges and camera control to the middle works just fine.

On the other hand, if you're new to using the pads for aiming, the size might be even more difficult to play with because you might want to lower the sensitivity which will require multiple swipes to turn around in-game.

The size of the left pad is okay but...

The Placement of the pads: They're are a bit of a reach, it's not te

Does the new dongle work with the old controller?

Can anyone here help me out? I'm working on a design in Studio that uses a few of these and don't know if they will hold parts in place or if they will flop around.

https://www.bricklink.com/v2/catalog/catalogitem.page?P=3613&C=7#T=C&C=7

Step 1: Signed into a computer for first time in a few months with 4-digit pin

Step 2: Go to sign up for windows 10 ESU

1. enter 4-digit password I just entered
2. enter email,
3. enter code sent to email,
4. enter password,
5. enter last 4 digits of my phone number
6. enter code sent to phone

This isn't working right now. Try again.

1. keyboard stop connecting. weird
2. Restart,
3. computer is not responding. restart by holding in power button
4. now it's trying to prep my computer to update to Win 11.... no. just stop.

Repeat steps 1 and 2. Still not signing in for the ESU

---------------------------------------------------------------------------

It's not a com

I'm in America and have prepared a photo for my application, but it says it needs to be printed at 600dpi. Everywhere I know does it at 300dpi.

I've seen walgreens mentioned but does Walgreens really print at 600dpi?

Has anyone else run into this problem?

• It's happening on Sony games and non Sony games in Steam. It even happens when Steam is closed.
• It doesn't happen when I connect a Dualshock 4 or xbox controller or steam controller.
• If the sn30 pro is being used it will turn off the moment someone turns on the dualsense gamepad.
• If the dualsense is connected first the sn30 pro will turn on for a second and then turn off.
• both controllers are connecting through bluetooth on the mobo and have updated firmware

it seems like I have all the documents and the dates are good. What's the next step? I can't read german or write in german so I would need help filling out forms. How long does the whole process take?

steam://controllerconfig/1693980/3199776434

I imported this from a template from the prior BPM. It chose it because it has gyro on the left trigger, gyro on left pad touch, andgyro on right pad touch. It also has mouse control when touching the right pad from the center, which reverts back to a d-pad on release for face buttons on the edge.

The problem I'm running into is that I can't for the life of me figure out where to adjust the gyro on the left trigger. In the past you could just go to gyro and see what was affecting it.

I also can't figure out how to add a modeshift D-pad under the click on the left pad. It looks like Steam removed that option?

Can someone with dead space take a l

it doesn't seem to be the same folder as before

I switched computers recently so hopefully this is on my end, but is there a setting that keeps the part selected after placement so that you can place multiple pieces of the same part without having to select it and press C?

or is this something that they changed in the past few months?

has anyone else here run this configuration?

PC is for graphic design work mostly, gaming second.

I know the set up is not quite there for gaming at native 4k, but I'm hoping that it could be enough for work and then DLSS could help me reach 4k when it comes to gaming until I upgrade my CPU and GPU in a 2 or 3 years. (I got stuck getting an overkill MoBo in 2020)

Will this work out well for me or should I just go for a 1440?

I'm fine with 60-100 FPS.