coolgui

So my nearly 8 year old Kenmore dishwasher (manufactured by Whirelpool) started to not heat up. The sanitize light would flash, and from searching this is confirms it's a heating problem. I took it out and tested the heating element, it shows about 10Ω resistance. I'm not sure what it should be, but the fact that it's showing anything make me think it's not the problem. I tested the thermal cut off (fuse?) and had continuity, I put it on a heated up skillet and it cut out around 300ºF (~150ºC). So I feel like that's not the issue. I tested continuity all the way back to the control in the front, and it's reading fine.

Could this still be the heating element even though it's reading 1

I have been using v5 for the last few months since there is no support for Apple Silicon in the v3 I was previously using. Everything mostly seems okay, but the scraper doesn't seem to be downloading thumbnails. I checked the settings, and it's enabled until Artwork filenames. I'm not sure if this is a bug or I've done something wrong.

So I've had a Nest Hello hooked up for 6 years now. The faceplate started deteriorating and Google sent me a replacement which is a Google Doorbell v1. Basically the same, but has the G instead of Nest everywhere. So I've already installed the push button part, but I wanted to replace the chime module.

I'm pretty sure I wired it wrong 6 years ago, because it would vibrate a lot. This is what the original doorbell wiring looked like:

Wires are labeled 1, 2 and 3. Most instructions say Front, Rear and Trans.

I'm not sure what goes where. I know one set of wires is c

I used to use cloudflare DNS in here, but now it's disabled. Why would they do this and does anyone know a workaround?

This looks like a dropdown but you can't click on it, and looking at the source there is nothing in there anyway.

I'm spending the entire month of July in Europe. I'm currently on the 5G Warp plan. I already have a data e-sim ready to go. I would like for calls and sms to work just in case. Here are the questions I have:

1. I have the old GSM sim that came with the starter kit. Will those sim cards still work or do they expire and will I need to buy new ones from US Mobile? We have 3 lines, I need to transfer 2 for this trip, and the "youngest" GSM SIM cards I have are about 6-7 months old.
2. I can't find any information about Darkstar international availability. Is it a better option and if so, how do I get a pSIM for that?
3. I read somewhere I need to deposit $50, unsure of how that work. H

That is all.