demonfoo

u/demonfoo


r/WRX_STI•

I own a 2018 WRX STI, which I bought earlier this year, and I'm satisfied with the car, but I realized I'm not certain that it's unmodded. The exhaust tips clearly say "CORSA" on them, and the exhaust miiiiiight be louder/noisier than stock, but I'm not sure. How would I identify for sure what sort of exhaust is on it? I don't see anything in the documentation from the previous owners indicating what it is.

12

r/RapidCity•

I was getting an oil change on my car, and on my way out multiple vehicles and officers for the US Marshals Fugitive Task Force. Anybody know what is going on there?

166

r/WRXSTi•

I recently acquired a 2018 STi Limited 50th Anniversary Edition, and have been enjoying driving it, but I'm also in a place where 93 octane fuel is pretty tough to come by. (There is one place in my area that has it, it's a nearly 50 mile drive to get to it, way too far to drive for a fill.) The manual says to use 93, but that if it's not available, 91 is acceptable. Do "octane boosters" really do anything useful, or are they just snake oil?

23


r/perl•

Okay, so this is going to cross some borders about where the issue might be... I'm not sure where the issue is, but hopefully someone might at least have a thought.

I long ago started writing an AFP client stack in Perl. Yes, I did that. The question isn't if that's possible. (If you're interested in seeing it, it's https://github.com/demonfoo/afp-perl.)

When trying to run the code on UN*X platforms (Linux, macOS, *BSD, Solaris/OpenIndiana), it works well. I've even added sendfile() support for uploading, for the platforms that support it. Over my home network, from my Linux machine to my TrueNAS Core NAS, I can transfer data over 10GbE at 5-6 Gbps. So I like to think it's pretty

60

r/perl•

Can it? It seems like unpack() will handle it fine, but if I try to do:

pack('Cx/a', ...);

it does wrong things (basically two zero bytes). Yes, there's supposed to be a pad byte in between (because reasons). I've cheated and done:

pack('S</a', ...);

which works as long as the length is never greater than 255, but... it's (obviously) still wrong. Or do I just have to pack() and pass the length and string separately?

12

r/PFSENSE•

I'm (still, yes) running pfSense 22.05 on my Netgate 3100 appliance, and recently added a second cable provider (my main one is generally reliable, but I want to have a fallback option, since I work full-time remote and a MiFi is at best a short-term solution). I have things configured to distribute traffic across both providers - they are both DOCSIS 3.1 cable modems supporting 1 Gbps downstream.

However, while testing things from my offsite VM, I noticed that, even after duplicating my rule to allow traceroute to function to the second provider connection (WAN1), traceroute still failed. I tried doing a tcpdump on the main uplink, and sure enough, the ICMP responses are going out

03

r/subarulegacy•

I bought a 2021 Legacy about 2 1/2 years ago, but apparently I've never used enough wiper fluid to get it to "low" before. I did today, and now it's telling me about it literally every 3 minutes. Is there a setting to have it... not? It doesn't harass me this much when it's low on gas!

85