The goal: Humidity sensor (0-10V readout) in the ceiling --> Shelly Plus Add-On (Ground and Analog In) --> Shelly power controller --> ceiling exhaust fan (120V) outside a steam shower.
The humidity sensor uses 24 V power and sends the 0-10V data signal (encoding relative humidity) to the Plus Add-on. That's clear.
I have a Shelly 1 Gen3 set aside for the controller, but am open to getting a different one if that would be better.
Should I use the same 24 V power for the Shelly controller, and have the 120V controlled by its dry contacts? Or should I power the Shelly at 120
