gregarius_the_third

We have an Ioniq 5 and we love it, but there are things that drive me nuts. Not dealbreakers, but very annoying. We have a young family and were considering swapping the minivan out for an EV. The only EV van really available is the IDBuzz, so I just was wondering what stuff bothers you the most about it?

Hoping someone here has seen this one, because I think I’m chasing the wrong thing. Setup • on the latest firmware The error • On-screen: “System Anomaly — Toolhead [N] MCU connection interrupted. Power off printer, check Toolhead [N] cable, then restart to resume operation.” • Code: 0003-0522-000X-0008, where the third group changes depending on which head it’s currently blaming. Timeline of what’s actually happening 1. Started throwing the error on Toolhead 1, over and over. 2. Powered off, unplugged and reseated the TH1 cable → error moved to Toolhead 2. 3. Shortly after → it moved back to Toolhead 1. 4. On reboot it lets me resume the print and printing starts fine — but ~1 minute

Hey everyone. I print lots of little 2 inch or so figures on the same plate that are 3-5 colors. I have most of the Bambu line of printers and the U1. The U1 is killer for prototyping single figures, but it seems to be much slower than say a P1S or X1C, even though those printers are single nozzle. Further, when I drag the speed to 150%, it doesn't keep it there, seems like every tool change, it resets to 100% speed.

Is all this normal?

Just figured I'd put this out there, I see people asking about pricing here and there. I used a bluetooth OBD2 dongle and the battery SOH was 99.7%. This was from an Audi dealer.

Snapmaker U1 quad-toolhead 3D printer. Kickstarter backer unit, open box/lightly used for test prints. Usage statistics show only 44 hours of total print time. All four toolheads verified working.

Comes with everything from original package including manual and accessories. Also includes red, white, black, yellow filament, PEI plate, Cryogrip Frostbite plate, and custom 3D-printed enclosure cover (shown in photos).

Currently $850 on Snapmaker's website and delivers in late March - this is available immediately.

Local pickup only in 20151 zip area. Will meet at a local police station parking lot (safe exchange zone). Cash preferred. PayPal Goods & Services also accepted.

Timestamp: https:

I print a lot of the same things on plates, sometimes skip objects saves the day on those long prints. I think Klipper has the feature, can anyone confirm that it's a feature on the U1?

This Metrik one. It's the perfect blend of vocals, instrumental, melodic etc. Any recommendations for similar ones?

https://www.youtube.com/watch?v=NwuCXc--nm4

I'm finding that most mixes are too liquid or vocal or no melody/minimal. I also really like Andy C's Nightlife Vol. 3 as well if that helps. Thanks in advance!

I made this post asking for direction on how to make a hueforge of a pretty difficult image here With you all's help and a HueForging video I was able to get to this: https://imgur.com/a/pJuqHXS