hatrantator

u/hatrantator


r/keyboards•

Hi there.

Trying to shop for a new keyboard after a spill on my Logitech MX Master.

Would love to get one with a knob to use for audio and animation timelines and a numpad. I am currently using xencelabs quick keys for that. It does a lot more than scrolling but i don't actually use the buttons as much.

I don't really care about mechanical keyboards except if they are silent. While i do play on my pc i do not like gaming aesthetics. Backlight yes, rgb no.

I've looked into Keychron Q and V series but the ones that seem okay are not in stock (or silent).

Logitech had a MX Master for creators at some point

Paying 200€ for a keyboard is not my prefered price but if it lasts for 5 years i a

212

r/Ring•

Hi there,
i've got a LT Terraneo 600525 and just bought a Ring Intercom 2024 and wired it.
When testing my door bell i get the error p16-160 which apparently means the call function doesn't work.

I checked the wires like 12 times and then i called customer support.

Uploaded a few pictures, nothing can be done, i get an email for escalation...

While searching for a potential solution i found a few user with the same error which all were waiting weeks after their escalation.

I live in an apartment building so i naturally tried the wiring for LT Terraneo 600 which is the same.

Does someone have had that problem and was able to resolve it?

10

r/sonos•

Hi there,

I am currently thinking about installing a multiroom setup at home. I need some speakers for my tv and 2-3 room speakers

I've read a lot about Sonos and the app is apparently a reason not to buy Sonos.

I was actually looking at the Ikea Symfonisk speaker series and from what i've gathered one must use the sonos app with it bc Symfonisk is basically off-brand Sonos.

So here is my question: Do Symfonisk devices have the same problem with the app as the Sonos devices? Is buying Sonos\Symfonisk worth it in 2025 or should i look at its competitors like Bose and Teufel?

223

r/godot•

Hi there!

Does anybody know how changing the emission point texture/mask and settings at runtime?

I found a way to do it with Particles2D - adding a bitmask with $Particles2D.set_emission_points() like so:
var msize = $Sprite2D.texture.get_size()

var new\_emission = \[\]

for i in range(-msize.x/2, msize.y/2):

	for j in range(-msize.x/2, msize.y/2):

		if test.is\_pixel\_opaque(Vector2(i,j)) == true:

new_emission.append(Vector2(i,j))

$Particles2D.set\_emission\_points(new\_emission)

​

With GPUParticles2D i need to set it in the ProcessMaterial if i am not mistaken. Also the emission point texture is elongated and its color value changed based on something (XY

10

r/findthatsong•

Hi there!

I am looking for a song around 2010 (probably a tad bit later. I don't really remember the anything besides the music video.

What i know:

  • dude rides a motorcycle
  • dude has some kind of flashy biker gear (a colorful tiger emblem or something like that, maybe a dragon)
  • dude is on his way to save another dude locked somewhere in a shed iirc
  • video looked very 80's
  • i recall there was some hand to hand combat involved
  • the video was around 7 mins iirc.
  • the video itself had a movie-esque intro along something like "two dudes fighting against evil clan but one got kidnapped"

I think the song had quite a bit of a high pitched singing or some heavier electronic influences alto

10

r/godot•

Hi there!

I am trying to create a Polygon2D from a Path2D.Curve and trying to fix my prototype gives me an aneurysm .

What i have:

func _polygon_from_path(points :PackedVector2Array) -> void:
	var poly := Polygon2D.new()
	var upper_border: PackedVector2Array = []
	var lower_border: PackedVector2Array = []

	for point in points:
		var upper_point := Vector2(point.x, (point.y - (path_width * 0.5)))
		var lower_point := Vector2(point.x, (point.y + (path_width * 0.5)))
		upper_border.append(upper_point)
		lower_border.append(lower_point)
	lower_border.reverse()
	
	poly.polygon = upper_border + lower_border
        add_child(poly)

Which,

14

r/godot•

Hi there Shader-Expert!

I am trying to paint a mesh with multiple textures while also using multiple masks.Partially successful it seems - altough my result has overlaying textures because of blending them with several masks. For some purposes i don't mind i am just trying to figure out what i did wrong.

My problem: https://imgur.com/a/J3qc8x5

​

All my masks are greyscale and i use the r-channel. I've tried starting with an rgb-mask, assigning each mask to a color-channel and assigned the textures to rgb but i was one color short for my textures and the rgb-mask was awefully yellow.

So my masks:

A vegetation_map to paint grass and rocks with

14

r/godot•

Hi there!

Does anyone know a good 3D VFX Course. Not necessarily for Godot but explained well enough so i can utilize the course with Godot.

I mostly find courses for Unity ShaderGraph or Unreal Engine.

While the basic principles are probably the same, i have not enough experience with one or both of them to decide if i can apply most of the taught stuff in Godot.

Does anybody know of a good, modern course that teaches immediate-advanced VFX techniques? Stuff like you'd see in Zelda: BotW or similar (Explosions, Smoke, Lightning, Magic, Special Attacks etc...). Bonus points if it is stylized.

10

r/Affinity•

Hey there! This question has popped up a few times i suppose but i haven't found a working solution yet.

I usually draw on iPad but now that i have a nice pen tablet i tried to use Designer and Photo v2 with it and encountered the Pixelpersona Performance drop.

You know, switching from Vector to Piyel takes about 15 secs to load, the app becomes blurred and windows is waiting for a response. Drawing with any brush that isn't in the "Basic" category results on a slideshow.

Is there a fix for it yet? I've tried a few things like resetting and reinstalling the app, enabling performance mode in windows and designer settings, trying windows ink instead of high precision, letting affinity alloc

17

r/godot•

Hi there!

The last two weeks or so i was trying to find practical ways to create Vegetation in 3D without the heavy usage of 3rd-party programms.

A disclaimer before i start - i am relatively new to 3D and am only a few weeks in. So please feel free to correct me or point me at the right direction if i write something wrong. The devil lies in the detail, after all.

I've spent the last two days on writing my own Spatialshader for foliage and failed royally.
So before i waste another two days on something that isn't even important for my MVP i decided to ask around how other people do it.

I looked into the following so far:

  1. Using MultiMeshInstance for Grass - this one is pr
21

r/godot•

hi there!

I am having some troubles with the CSGPolygon. Or maybe that just how it is...

Either way: I am trying to make a Lightning Strike of some sort and therefore i tried the CSGPolygon Path-Mode with a material from material maker.

The Problem with the CSGPolygon: The Texture seems to be offsetted. Here are 2 screenshots - the left on is a normal MeshInstance and the right one is the CSGPolygon (one in Pathmode and the other is just the basic Mesh Cube) Both have the same material applied but the CSGNode cuts the texture in a weird way. https://imgur.com/a/oD01L2s

Does anybody how to fix this? Or is my approach wrong?

I just want to draw a line in 3D with an animated texture

42

r/MaterialMaker•

Hi there!
I am trying to create my dynamic Material in MM.
While it really is an awesome piece of software i struggle with adding a custom input to control a node.

I am trying to add an input for the SineWave Pattern that scales its phase and frequency.
The basic idea was adding a phase_in as Greyscale so i can add a ping-pong (stolen from the DVD-Logo Material) to change the phase over time.

I've created the input but after that i have no idea what i have to to do to actually change the inbuilt param.

I suppose i need to add a global function that has something along '$phase += $phase_in'.
I am also not sure if customizing an inbuilt pattern node is even a good idea.

12

r/godot•

Hi there!

I have troubles using a shader on a Node2D i use the _draw() method on.

The shader works fine if i use a Sprite2D with a Texture on it. Very simple shader (reads red values in TEXTURE, recolors and adds some pixel based on r.value) .

When i use the shader on a Node2D with a simple _draw() method and drawing rects or circles, the shader changes the color but does not draw additional pixels nor is the wind effect applied.

If i used Sprite2D with a Texture, the Texture behaves properly.If i draw on that Texture only the texture is shaded properly

EDIT: Apparently the shader doesn't even read the drawn layer... Welp - is there a way to shade something created with _draw?

i

53