j-dev

u/j-dev


r/homelab•

Some weeks ago I took stock of my self-hosted/homelab setup and decided to consolidate my hardware. Since my media are in my synology NAS, I decided to get rid of some gear, including the Synology NAS and consolidate everything to one MFF PC running TrueNAS and all my container workloads and one mini PC for PVE labbing.

The plan

  1. Create a 6TB mirrored ZFS pool on Fedora 43 on my main PC to transfer the data there from my Synology.
  2. Move the 12TB drives from my Synology to the TrueNAS box via rsync.
  3. Transfer the data from my PC to TrueNAS via rsync or whatever else made sense.

The reality

I left rsync running overnight thinking I'd wake up to a job well done. Instead, I

020

r/linuxquestions•

Hello. I have the issue below and I'm wondering what the best way to fix it is. I'd appreciate advice, with code samples or links to good written or video tutorials if this is already well documented elsewhere.

  • I have a NAS that has SMB shares.
  • I mount two separate shares on a Linux SMB client via /etc/fstab. The SMB client is a Plex server.
  • If I unplug a NIC (which is rare) or reboot the NAS, the SMB mounts get messed up unless I manually do a sudo mount -a. The problem with this is that I won't know that the SMB mount is messed up unless I'm trying to watch Plex and it's not working.

I'm wondering what the best approach is for remounting the SMB shares if their mounting gets me

13

r/pihole•

Hello. I have an issue I can't figure out. I run Pi-Hole via Docker on three different devices with similar configs, but only one of them keeps becoming unhealthy. The device in question is an aarch64 Ubuntu VM in Oracle Cloud Infra (OCI).

The Docker container goes unhealthy and restarting it doesn't fix the issue. If I delete the container, remove its volume information, and redeploy it, it will be healthy for a short while and then run into errors. I monitor with Blackbox exporter, and I see it resolve DNS queries for some time and then go quiet, then work again, then go quiet again.

My container config details are below. Here is a link to the logs.

120

r/selfhosted•

Hello. I bought a Beelink S12 with an Intel N100 because I read the iGPU was a champ at hardware transcoding, even for at least a single 4K stream.

I have a Plex Pass. I am running Ubuntu Server 25 with Plex Media Server installed as a package (not a container), and hardware transcoding is enabled in the settings.

If I download 4K YouTube videos via Metube using the best quality in the mp4 container, it uses the av1 codec, which my Apple TV 4K cannot direct play. The video stutters every few seconds, which is no better than I used to experience with software transcoding on my Synology NAS. Any thoughts? I typically try to get media in supported formats for my devices, but I was excited to

311

r/selfhosted•

This is a sanity check: Does Authelia ever fail to authenticate users correctly for any of you? Here is what I'm finding:

  • I use Traefik with Authelia. I switched from Authentik to Authelia because it has a much lighter RAM footprint.
  • I use Cloudflare zero trust to access my applications. Cloudflare reaches out to Traefik, which in turn uses Authelia for forward auth.
  • I set Authelia to bypass authentication for my home subnet and for the Docker subnets.
  • I set my Pi-Hole to resolve my services' IP addresses to Traefik's internal IP for better response times and to simplify the authentication bypass component.

I was out of my home trying to access a service when I noticed I hadn't bee

04

r/WindowsHelp•

Hello. I run VMware Workstation 17 Pro on Windows 11 Pro. I recently had to reformat my Windows 11. After the fresh Windows install, I installed VMware Workstation again and tried to turn off memory integrity so VMware Workstation VMs would launch.

Something I am seeing now that I didn't see before the reformat is that Windows Defender says the memory integrity setting is managed by my administrator. I am the only user and am the administrator. I have tried to disable that setting via group policy and registry edits based on what I've found online and from Claude/ChatGPT, but nothing is working. When I look at System Information, it says Virtualization-based Security is Running. What can I

11

r/WindowsHelp•

Hello. A long time ago I unplugged my Logitech HD C920 camera and Firefox was never able to use it again. All other apps could use it without issues.

More recently, I tried using my camera with Chrome and it wouldn't work. After several reboots, including after disabling a lot of startup applications, my camera still won't work with any application. I updated the drivers and that didn't work. I even bought an Anker webcam and it doesn't work either.

The last thing I remember installing was Omnissa Horizon Client, which I use for my company's VDI. I also updated my BIOS (ASUS TUF gaming) and some of the drivers related to my motherboard and chipset. I really don't want to reinstall Windows

11

r/selfhosted•

Hello. Yesterday I noticed weird behavior on my MacOs (Firefox and Plex client app) when trying to access my Cloudflare Zero Trust endpoints. Does anybody have any experience/insight here? Description of setup and symptoms below. Let me know if you need more detailed information. I reproduced this on different WiFi networks, with different DNS servers.

Setup

Oracle Cloud

  • I have Docker containers on Oracle Cloud
  • I have a Cloudflare Zero Trust tunnel with a Docker container on the same Oracle VM
  • I don't think it matters, but the CF container talks to to the other containers by Docker network IP b/c talking to them by Docker compose name/container name wasn't working (perhaps th
10

r/Proxmox•

Hello. I know this a Linux question more than a Proxmox question, but I think people in this community are more well versed in the intersection between Proxmox, Linux, and ZFS.

  • My setup is two HA nodes with a QDevice for tie breaking.
  • Each node has a SATA SSD drive for boot and a secondary NVMe drive for the VMs.
  • I created a ZFS pool on each node with a single drive for the sake of the replication and failover if a node fails. Funny thing, my recent failure scenarios have included ZFS mishaps and NIC issues, so there hasn't been a failover outside of testing by shutting down a node.

The ZFS pool on one of my nodes malfunctioned soon after I installed the drive, so I got a USB NVMe en

13

r/linuxquestions•

Background

Hello. I have a two-node Proxmox cluster using mini PCs, with a QDevice for tie breaking. Each node has a SATA SSD drive as its main drive and an NVMe drive for a single-drive ZFS pool to leverage HA with replication and VM failover. I installed a Silicon Power 2TB NVMe M.2 PCIe Gen3x4 2280 SSD on one of the nodes last Wednesday.

Problem

The drive appeared to be working fine while unused (working fine as in showing no errors and no problems with partitioning). Yesterday I created the ZFS pool and moved data to it. At some point the node became unresponsive and indicated there were I/O errors. The node eventually became responsive, but the drive does not appear in the ou

10

r/Proxmox•

Hello. I am running Proxmox on two mini PCs, each with a 2 TB NVMe drive. The nodes are clustered with an Ubuntu mini PC as a Q device for quorum. I am interested in running these as HA devices using LINSTOR. I was following this tutorial and stopped at the part where the person appears to be dedicating an entire drive with the command vgcreate linstor_vg /dev/vdb.

  • Is there a way to use part or all of local-lvm instead?
  • Or should I partition local-lvm into smaller partitions so I can dedicate a new partition to LINSTOR?
11

r/Proxmox•

Hello. I have a Proxmox cluster with 3 nodes. The one I'm posting about is an EliteDesk 800 G3 Mini with 16 GB RAM. It's running one LXC container with about 1 G RAM and a VM with 6 GB RAM running Docker containers. The node appears to be using about 12 GB of RAM, but I'd expect it to be using no more than 8 GB based on what I allocated. What gives? I'm leaving the very long command info in case it has useful info. I'm running MinIO in Docker, so I'm using the host type CPU for this VM.

ps aux --sort=-%mem | head -n 10
USER         PID %CPU %MEM    VSZ   RSS TTY      STAT START   TIME COMMAND
root        1699 18.4 37.1 7367380 6044196 ?     Sl   Mar12 1132:46 /usr/bin/kvm -id 12
04

r/Traefik•

Hello. I'm hoping someone can help me understand what I'm doing wrong and how to fix it. I have Plex exposed via a CloudFlare Zero Trust tunnel w/o any middlewares so that the native Plex apps will just work over the Internet. I want to prevent access to the settings, but it doesn't seem that the settings part of the URI is a path nor a query.

URI: https://plex(.)example.com/web/index.html#!/settings/web/general

Here is the router that doesn't block access. What do I need to change for it to work?

    routers:
      dead-end:
        rule: "Host(`plex.example.com`) && PathRegexp(`.*settings.*`)"
        service: deadend
        priority: 2000
        entryPoints:
27

r/PleX•

Hello:

I'm hoping someone can help me. I recently updated my Plex docker container on my Synology NAS and the following happened:

  • My Plex media is not showing up on my Desktop apps (Windows and MacOS) nor via the very server's web interface. This is true across multiple browsers and private browsing.
  • My media shows up and plays on my iPhone and iPad iOS Plex app and on my Fire TV Cube Plex app. This is true even after signing out and back in on my iPhone Plex app.
  • I have restarted the Docker container a few times, and the NAS itself once, and this hasn't changed.

Compose file below, with redactions.

---
services:
  plex:
    image: linuxserver/plex:latest
  
03

r/Proxmox•

Hello. I am having ZFS issues. I'm hoping someone can help.

  • I have a 3-node Proxmox cluster WITHOUT HA. I have two 1 TB external hard drives connected to a node via USB.
  • I tried to create a mirror ZFS pool and the process failed on the GUI. When I tried it on the CLI, it failed and told me the disks were not the same size. That's odd, b/c lsblk shows they're the same size.
  • Creating the zpool via the CLI works if I use the -f flag, but the zfs pool won't show up in the GUI as storage along with local and local-lvm, which means I can't carve out a slice to give to a VM.
  • I plan to check both drives for errors. Before I installed proxmox on this server, I was running Ubuntu 24.10
13