
johnqevil
u/johnqevil

Title. I've been using Soulsync the last few months and it's just not working so hot. It will usually download just fine, but imports are 50/50. I'm using slskd on the backend and navidrome as the primary music server. Are there better options right now for users to search and download music to the server?
To allow this cheap little thing to use a C-to-C cable, I need to add a pair of 5.1k resistors to the CC1 and CC2 pins on this board to ground (marked in red). They have continuity to each other, and both to the right hand R4 spot (marked in green). Could I run a single resistor from R4 to ground instead for this?
Just started using this in the last few days, and ran into a few issues:
-
One of the devices (T114v2) factory reset overnight. The device was off when I got up this morning and when I went to connect noticed the name had gone back to the original. I have not set it up again, but that's less than optimal for what I intend to be something that "just works" for my group.
-
A different one (T114v2) was stuck on "Loading" for two hours after having been set up and working for 24 hours. It was hibernated to swap an antenna, then on boot that happened. I had to erase the flash, not just reflash as that didn't work, to clear the issue.
-
The third (Heltec V3), will not recognize the installed
I mean to retag the genre for each song, like "if genre = anything with rock, replace with rock." So on and so forth for country, metal, etc. Musicbrainz did a great job doing the initial tagging, but I have 5000+ songs and a couple hundred different genre tags. I'd prefer a commandline tool for each of scripting, but if it can accomplish the above with a GUI I'm game.
Looking for a programmer that'll work for a 2021 Lincoln Navigator. I only have the one FOB and the dealer wants 500 to add a new one. Figure I might be able to do it myself for around that. I was looking at the Autel KM100, but it looks like their IMMO function isn't supported for this vehicle on that model. Any recommendations?
I'm looking for an IP KVM that can switch between 2+ machines with usb inputs, HDMI video, and can be used via either a web interface or a windows client. I see a few out there, but my budget is limited on this front (~$150 usd)
Title, really. It has a 56wh battery currently, looking to find a drop-in replacement with a higher capacity that fits without modification. Anyone know of one that'll work?
Hello, I'm working with a set of Heltec T114s with the GPS modules, and we can get position information locally when in radio contact but it doesn't seem to work with the MQTT proxy. I have yet to try with a direct wifi connection, and we have tried with both the main public meshtastic MQTT server and a private Mosquitto server hosted at home. Is there a trick to getting location information on a private channel via MQTT?
My 16yo daughter would like to go with her friends on 7/19, but the site and resales are sold out. My question is this: can we buy the resale camping ticket and just...not camp? Can she just use the day pass for 7/19 instead?
Any good shooting spots not too far off of 12 between McCleary and Aberdeen? We make this trip every couple weeks already.
I'll get the obvious stuff out of the way first: the model is not sliced yet. It's a single object, and a single filament selected. It defaults to slot 1 on the AMS, and in the objects menu I can right click on the color and select the PETG that's loaded in slot 3, but it just adds a prime tower with the original PLA and the PETG, and the model doesn't change. I worked around this by removing all filaments in the menu then changing the remaining one to PETG so it would slice correctly for that type and then it would let me print with it.
Any ideas why Studio will not switch the object to PETG despite no other objects being on the plate?
