jundle

u/jundle


r/zabbix•

TL;DR a disabled trigger still fires an email and i don't want it to.

My perception is that when i disable a trigger, that the rules it's a part of shouldn't still work on the disabled trigger, and i shouldnt get emails. Below is a fired off email from a trigger that is disabled (and the trigger being disabled is noted in the email).

I have a generic trigger setup for emails to fire off when a disk is at 80% usage. On certain srevers, the 80% usage loses it's meaning when a drive is at 2 to 3 terabytes. So I clone the trigger and pin the cloned trigger against different numbers and then disable the original trigger. I *feel* like the disabled trigger shouldn't fire emails, but it seem

27

r/Shadowrun•

I clicked on the "wiki" link on the right of this subreddit and so some options for sr5, but most are defunct. as a learning gm, is there a cheatsheet someone can point me to (or link to) that has the base typical rols for PCs during combat?

72

r/zabbix•

I have a question about figuring out how to adjust the zabbix "Nutanix Cluster Prism Element by HTTP" template so that zabbix can somehow display all current recovery points from a prism central managed AHV solution. I assume it needs to be some kind of item prototype off of a discover rule, but that is mainly a guess. Anyone deal with zabbix and/or have ideas on how to do this?

40

r/zabbix•

I'm running: Zabbix: 7.4.5 Ubuntu: 24.04.3 LTS (Noble Numbat) PostgreSQL: 16.9 TimescaleDB: 2.19.3 (Community Edition) Nginx: 1.24.0 I have a series of Trigger Action Alerts.

Is there a way for me to manually test fire these alerts to see messege formatting and the like, or do i actually have to create the alert condition in the host for the alert to fire?

67

r/zabbix•

I have an alert action that sends an email when "trigger equals 'switch name' has 'Unavailable by ICMP ping'". This is my "alert me when a switch is down.

I feel like i am doing something wrong and that this could be more efficient. Is there a way to set this up so that 'Unavailable by ICMP ping' is run against a host group, so i dont have to name all the switches in this action? My template i am using is juniper by snmp.

72

r/zabbix•

i have a qfx 5120 and the juniper by snmp template isnt pulling port metrics. zabbix rev is 7.4.3 and juniper by snmp template rev is 7.4-2.

anyone else having similiar issues? this template pulls interface metrics from our qfx 5110 and ex 3400's.

31

r/zabbix•

Hi all,

I’m trying to replicate some of the functionality of SolarWinds DPA (Database Performance Analyzer) using Zabbix 7.4, and I’m hoping for some guidance, please.

My Setup:

  • Zabbix 7.4 on Ubuntu, using PostgreSQL
  • Monitoring a Windows Server running MSSQL using:
    • Zabbix Agent 2 (7.4)
    • The official MSSQL Agent 2 plugin/template
  • Template in use: Template DB MSSQL by Zabbix agent 2

What’s working:

  • I'm successfully monitoring basic SQL metrics: job status, database size, availability groups, etc.
  • The host is collecting data without issue.

What I want (DPA-like functionality):

I’m looking for something similar to what **SolarWinds DP

21

r/zabbix•

Zabbix Version: Zabbix 7.2.6

Host Setup: Host monitored using Zabbix Agent (active)

The Log File (on windows server box):

C:\Program Files\YYYYYY\YYYYYY\logs\YYYYYY.log

What I'm Trying to Detect:

The log sometimes contains any of the following lines:

"Reading data from"

"is not reading any new data"

"Couldn't read from device with"

I want an alert to fire if any of these appear in the log.

Item Configuration:

Name: Recording Library Error Log Monitor

Type: Zabbix agent (active)

Key: log["C:\\Program Files\\YYYYYY\\YYYYYY\\logs\\YYYYYY.log","Reading data from|is not reading any new data|Couldn't read from device with",,,skip]

Type of informat

06

r/zabbix•

TL;DR:

Now that I’ve added 102 Juniper switches, my Zabbix DB jumped from 114 GB to 122 GB in just 3 days. I'd like to keep it under 300 GB even as I onboard Windows servers next (if that is plausable). Will this growth stabilize? Are my housekeeping settings too generous? Any tuning suggestions would be hugely appreciated.

Hey folks,

I'm running Zabbix 7.2.6 on Ubuntu with PostgreSQL as the backend. Over the past few weeks, I’ve been gradually adding Juniper switches into monitoring using the official Juniper SNMP template. As of last Friday, I finished adding all of them—there are now 102 switches listed under Hosts.

While I was still adding devices, I didn’t worry too much abo

410

r/zabbix•

I'm trying to use Zabbix 7.0.10 to discover Juniper EX3400 virtual chassis member serial numbers (all members ) using SNMP.

What I'm doing:

  • Discovery Rule: OID .1.3.6.1.2.1.47.1.1.1.1.2 (gets component descriptions)
  • Filter: {#SNMPVALUE} matches FPC: EX3400 (to isolate real VC members)
  • LLD Macros:
    • {#SN_DESC} → {#SNMPVALUE}
    • {#SN_INDEX} → {#SNMPINDEX}
  • Item Prototype:
    • OID .1.3.6.1.2.1.47.1.1.1.1.11.{#SNMPINDEX} (gets serials)
    • Key: vc.serialnum[{#SNMPINDEX}]
    • Value type: Character

The issue:

The item prototype gets created, but I see no values in Latest data. Nothing shows up, even though snmpwalk returns valid serial

37

r/zabbix•

Hello!

I’ve got a fresh install of Zabbix 7.0.10 set up, and I’m still learning how to configure everything. I’m working on monitoring the Juniper EX3400 switches in our network and could use some help getting things set up correctly.

What I want to do:

  1. Track if any Juniper EX3400 switches go offline or lose connection.
  2. Have Zabbix send me an email notification when that happens.
  3. Figure out if there are other useful things I should be monitoring on these switches (CPU usage, memory, temperature, port status, etc.), and how to do it.

Since I’m new to Zabbix:

  • What’s the best way to set up SNMP monitoring for Juniper EX3400s?
  • Are there specific SNMP templates o
06

r/DrWillPowers•

Hello all, I could really use some insight on my labs and my overall situation. I suspect my fatigue issues are linked to my declining testosterone levels, but I don’t know for sure. I’d love to hear from anyone with experience or knowledge about this.

About Me & My HRT History:

47 years old, AMAB

6’0”, 220 lbs (currently dieting to lose weight)

Been on HRT for 4 years (last 2 years on injections)

Current HRT regimen:

Estradiol Valerate: 2.6mg every 3.5 days (5.2mg/week)

Progesterone (Rectal): 100mg nightly

Progesterone (Topical): Applied to breasts 6 days/week

Testosterone Cream: 5mg/mL, applied to genitals 3x per week

My Symptoms & Concerns:

Pretty consistant fatigue, brain

53

r/Netbox•

TL;DR Is there a way for me to have it so that when I click on a Tag, that all “tagged” entries, across all categories, show up? By default?

The Long:

Where I work, I have some ISP connections that terminate to an ISP provided switch. I then connect whatever is the appropriate media into different ports on the ISP provided switch, and now that media is carrying one of the myriad of different connections from my ISP.

Example: ISP switch has 1 uplink connection to the World/ISP. That 1 uplink connection houses all the incoming "world data". I then connect a cat6 cable to a designated port on said ISP switch, and that cat6 carries my internet. I then connect a fiber cable to a designated p

20

r/playrust•

Occasionally facepunch adds in a touch more movement sway into parts of Rust. Maybe an axe swing causes the pov to sway a bit more, maybe something else. Right now, on the staging client, on the rustafied staging server, it feels like walking has a bit more sway. I get that this is probably not a big deal to most, but it is a deal to some.

I have visual issues, and certain things either hurt to look at, or cause me motion sickness. motion blur hurts to look at (but I can turn it off). The sway thing that seems to pop up from time to time causes me a little bit of motion sickness, and I think it does for a few others as well.

If reasonable, please don't add in more motion sway, facepunch. A

116

r/ledgerwallet•

From my understanding, and from reading "https://www.ledger.com/back-to-basics-part-2-an-infinite-number-of-keys", it looks like the passphrase that my ledger generated, is a master seed. And from that master seed, private keys are created for the individual wallets I use (apps installed on my ledger). If I wanted to abstract the actual individual private keys (for the sperate blockchains that I have coins in) out of my ledger, (not just the master seed/pass phrase), is there a way to do that?

67