linerror

having issues with the 5gbe port on the bgw-320-500 and 505 randomly just drop out... i can still ping public ip address but nothing will route through the gateway so it appears as if the internet is down.

if i plug into one of the 4 x 1gb ports, it works... and i can ping public and private ips, but i can't connect to anything on the 5gbe port locally...

this happens with every device i've tried to connect to the 5gbe port. cisco, mikrotik, unifi, tp-link, dell switches and gateways... intel, aquantia, mellanox and chelsio nics... multigig copper, multigig sfp+... att has blamed everything under the sun, my router, my switch, my desktop, my laptop, my UPS, my powerstrip, my electrical, m

been experiencing some instability so built another pfsense box and have the exact same problem.

machines are overkill, bare metal, 1U, dual xeon's, ecc registered, mirrored ssd's with zfs, chelsio t540-cr nics, 2 x copper sfp+ for WAN, fiber sfp+ for LAN, DAC for HA, plenty of air flow.

randomly (longest was 8 days, shortest was 4 minutes) with normal use... or as i just discovered every time i run the bufferbloat test at https://www.waveform.com/tools/bufferbloat -- pfsense drops the internet connection.

i can access the pfsense web interface, i can ping IPs on the internet (such as 1.1.1.1) but sites like [1.1.1.1](https

Primary workstation died a horrible death. Need a replacement, looking at this -- https://pcpartpicker.com/list/pWPs29 -- open to suggestions, would like to wait for 3rd gen, but need a system to replace primary workstation.

​

Need some decent power, 1 16x for gpu, 2 8x for add-ons. plenty of usb 3, 32-64gb of ram, at least 2 nvme slots, and 10gbit onboard.

​

not interested in watercooling. will overclock. already have the case, gpu, etc.

Spend a lot of time in the home office and in my work vehicle, would like to quit swapping batteries out all the time. Any suggestions?

have a topping mx3 that came with a very cheap power supply. with my speakers it turns off at about 80% volume. 24v DC rated at 3.3A but i doubt it. i have a real power supply that's rated at 6.6A and it's 10 times the weight and size. when using the 6.6A psu it drives the dac to 100% and the distortion is noticeably decreased, bass is more impactful, etc. generally sounds better... i can't find a replacement for the SMSL brick as it's a branded unit. i've picked up and returned a few generic bricks from amazon and they all performed as well or worse than the topping factory supply, even being rated 2-3 times higher.

just looking for a quality 24v DC psu, with a 5.5x2.5mm barrel or lugs,

Looking for anybody out there that remembers the name of a series of books written by a science teacher by the name of Ty Hines(not sure on the spelling). Classified as young science fiction about underwater aliens. Can't remember the title or find anything online.

The Ergodox supports (Infinity in this case) UART protocol over the USB 3.0 pins for "daisy chaining other Infinity devices such as number pads, mice, other keyboards, etc."

I'd like to add a pair of 3 switch foot pedals and use them for things like lock and latch either by modifying my existing pedals or creating an adapter that would take the programable HID output from the pedal and pass it on in UART to the Ergodox. Anyone seen something like this or have any suggestions?

Posted: Dec 14, 2016 10:55 PM CST Updated: Dec 14, 2016 10:55 PM CST CORPUS CHRISTI -

The City of Corpus Christi has advised not to use tap water until further notice.

An unknown chemical substance may have contaminated our water supply. The city is taking an abundance of caution and is advising residents not to use water for consumption or any other purpose.

Use bottled water only for drinking, preparing food, brushing teeth, washing dishes or clothes, washing hands, bathing until further notice.

Pets are also not advised to drink the water.

The city says boiling water or treating the water will not make the water safe.

Backflow from chemical process plant.

http://www.kiiitv.com/mb/n

Have an old friend that is going through some rough times. If you're in the Coastal Bend region of South Texas around Corpus Christi, and a golfer or know someone who would like a lesson or two, it would really help him out a lot. He's also a painter and does portraits. If you're interested I can put you in touch or you can contribute to his campaign, even a dollar would help. Suggestions are welcome. http://www.indiegogo.com/projects/dans-campaign--2/x/6286773

A friend won a generic Miller beer branded tandem bike at a raffle and after a teardown and rebuild it was almost road worthy... Took if for a test ride with my wife and got half way down the street... before the combined weight of me and the weight on the rear handle bars crumpled the front seat tube...

Was able to use a tubing bender and straighten it out but it's compromised.

There is a beefy seat stay but it's better than halfway down the seat tube and about 8 inches from the bottom bracket. With the included post an inch lower than the minimum insertion point it's about 5 inches short of the seat stay and that's where the seat tube folded... need a 25.4mm post that's though enough to