mansetta
u/mansetta
Uutiset ketuttaa ja ahdistaa, en muista oman aikuiselämäni aikana, että kokoomus ois koskaan ennen ajanut näin avoimesti tällaista rikkaat vs köyhät maailmaa.
Miltä tuntuu kun rippeetkin hyvinvointivaltiosta pistetään paskaks omien silmien edessä?
Jos esim SDP saa enemmistön seuraavissa vaaleissa ja ei pura monia näistä asioista, niin lähtee varmaan loputkin uskonjämät tähän systeemiin.
Huoh, no oon kyllä aavistellut jo vuosia että tällasta on tiedossa.
Ministeri MTV:lle: Suomen huumekriisiin vapaaehtoista pakkohoitoa
mtvuutiset.fi/artikkeli/grahn-laasonen-selvit...I am a beginner and have been looking for some magazines. However it bothers me that in some cases at least the answers are clearly visible on the same page as the problem.
Can anyone recommend some booklet/magazine etc with a layout that hides the answers? Especially looking for two/threemovers.
Ideally I would like to try solving while holding a small pamphlet of problems and a pencil, and lazily laying on the sofa.
Here's an interesting thing I was tasked with:
A small embedded Linux device has two Ethernet ports, which will be connected to a switch, and we need to test the connectivity.
The test proposed to me was:
- Set eth1 IP with
ip addr add(to an IP in the same subnet as eth0). - Listen eth1, e.g.
nc -l "$eth1_ip" "$test_port" > /tmp/ethtest - Do something like
echo "hello" | nc -s "$eth0_ip" "$eth1_ip" "$test_port" - Check the file contents are as expected.
The problem is that even when the other port is not connected to anything, the test passes. Currently the other port is just connected to my laptop so I can SSH to the device. I googled a bit about the problem, but did not get
There was one song I think mentioned multiple times, or at least in the end when they listened to music at a bar or something.
I liked it a lot, quite poppy and ethereal with a female singer. I cannot find it anymore and don't have access to the book. Can anyone help?
I am trying to learn Elixir (frankly by trying to do too complex things right away). I am interested in doing a server, which could be started once and left running, then one or more clients could be started separately from another terminal when needed, and communicate with the server.
To me it seems that the client and server could be different modules. Do I also need different nodes for them? I am reading the document and slowly learning, but it would be nice to hear from more experienced people here as well.
Hello,
I have a Windows laptop, that is connected via Ethernet to my Raspberry Pi. The laptop is also connected to my office internet via Ethernet.
Ideally I want to set a static IP to the Pi. However, what bothers me is in 'dhcpcd.conf' I would need to specify a static router. When I do 'ip r' in the Pi, it shows the same IP as was dynamically assigned to my eth0 interface on the Pi.
Sorry I am crappy at explaining technical stuff...
TLDR: With ICS, what should I set the static router IP to in dhcpcd.conf?
I have an Raspberry Pi based AutoPi device and a 8Devices Korlan USB2CAN device connected with a split OBD cable. AutoPi apparently uses this setup in their lab and it "should work".
However, I cannot seem to get any data through. Both interfaces constantly have errors. I would like to set the 'restart-ms' option on the AutoPi interface, but unfortunately it does not let me set it down. It always shows it is up. Currently I am looking in to that.
This is the details for the can0 interface on the AutoPi:
5: can0: <NOARP,UP,LOWER_UP,ECHO> mtu 16 qdisc pfifo_fast state UP mode DEFAULT group default qlen 1000
link/can promiscuity 0 minmtu 0 maxmtu 0
can state ERROR-PASSIV
I use a lot of Götebords Rapé, and I love that it has this acidic quality that hits my stomach, lol. I have just somehow grown fond of that feeling. However not nearly all snus I use have this effects, at least if it is not the first pouch of the morning. Can you people recommend me any brands that might be similar to GR in this aspect?
Hi, a total noob here.
I am trying to learn about these things, and started wondering, is e.g. the J1939 protocol also used to control the vehicle, or only for getting diagnostics etc? Could you for example control the engine by sending some PGN?
And do not worry, I am not trying to actually do anything :D this is just for learning.



