miningdroid

Nah just kidding, it's still (ver B20.0330.2) a piece of shit. At least it will install and run now! I've lost control over the RAM LEDs and they are stuck in rainbowpuke. The settings will sometimes persist thru a reboot, sometimes not. I got my analog LED strips to stay red instead of orange! I got a random bluescreen right after I installed it which was suspicious AF, but it hasn't happened since.

They're making progress, try the latest version!

I had to change my sister's car's battery in the parking lot of a gas station today. After failing to get it jump-started, we pushed her carr off to the side and were planning on heading to whoever was open to find a replacement. Some kind stranger pulled up and just happened to have a battery in their pickup bed! He didn't want anything for it and so I thank you again kind stranger!

I’ve set up a successful HA and Ceph cluster. This currently uses 2 gigabit ports in LACP which works as expected. I’ve now got a 10 gig network and wanted to send the cluster traffic over that too. What options do I have?

Prox doesn’t allow you to specify another network after the cluster is created. I tried to do this once before and broke the cluster. Can this be done safely/correctly using the command line? Is it safe to change files in /etc/pve? Does there need to be a command to push new config to the cluster?

For Ceph it’s more mysterious. The official docs say to change ceph.conf but there is no OSD config in there! Prox manages the OSDs for some reason and I’m not sure how to add

So at the start of this story, everything (concerning IPv6) was working fine on just the LAN subnet. It's a directly connected gigabit interface, no VLAN, also has IPv4. I am able to run tests and access sites over IPv6 with computers on this subnet.

I then tried to add in another subnet which is (mostly) virtual machines running on a host which exposes its internal network over VLAN 2. Again, there were no problems routing to machines on this network, and IPv4 is working as intended. Originally IPv6 was not turned on.

When I turned IPv6 on for this second subnet, some very strange things started happening:

• The LAN subnet changed IP addresses.

• The VLAN 2 subnet did not get an IP addr

I’m not sure anything changed recently in my pc, but now I can’t launch RGB Fusion! I get the “please wait” screen but then some app called “check_kill” runs, crashes, and then runs again. I never get the RGB Fusion window. Did an update cause this? Anyone got any ideas?

Edit: Event log shows RGBFUSION.EXE crashes with the faulting module some dll file. I can post the specific dll if anyone is interested.

It's not in my list anymore, and I'm pretty sure I didn't get banned. What happened?

I keep trying to think of a way to get three machines running proxmox, but I'm coming up short unless the hardware is wildly asymmetrical. I've got two decent servers, but the only thing I can lay my hands on for a third device would be some crappy celeron J1900 and those are capped at 8 gb of ram! Is it worth it to try and use the NUC as a third host? I can make the shared storage work using iSCSI and/or NFS but I'm wondering if there's even a point. If I can't use the third tiny node, then why not just do a two node cluster and be done with it? There's a lot of scaremongering about this type of configuration, but this is just my homelab and not anything critical.

Is it better to risk the

I've got a proxmox server (HP DL360 G7) connected to a DS4243 (5 x 2 tb SATA, 2 PSU, 2 IOM3) and initially it was working great. After about a week I noticed one of the drives wasn't flashing, and it got kicked out of the ZFS pool! I removed and reinserted the drive, and it resilvered just fine. No issues for again another week, then a different drive went unavailable. This time I took a look and the console is full of messages like:

Nov  2 17:11:31 moya kernel: [360021.138211] sd 4:0:0:0: [sdb] tag#140 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
Nov  2 17:11:31 moya kernel: [360021.138217] sd 4:0:0:0: [sdb] tag#140 CDB: ATA command pass through(16) 85 06 2c 00 00 00

I would like to be able to bind an attack to both a key on the keyboard and a side mouse button at the same time, or even two different keys on the keyboard at the same time. Currently you can only bind one to one.

Also, what about run-by-default, or the ability to toggle always running on or off. I mean it's never like you actually want to go slow, ever.

Does anyone know if there's a list of what songs are in the mixes at VOLT Club? There's a lot of awesome songs in there but I can't identify them!