40
natzo
u/natzo
221
Okay. I have 1 fan set up like the first. a 6-inch fan connected to a cable, a switch, and directly to an outlet with a simple plug. Has worked fine for a while, but I was told later it's a fire hazard, so I plan to change it.
I also have two 4-inch fans that I want to add behind my resin printers to improve the extraction. I already have the vents/tubes/hoses set up, so it's just adding the fast for extra push. I was planning on connecting them directly with cables like the first one, but again, I learned it was a fire hazard. So next I read and saw I should use something like this 3 items combined.
[12V 2A Power Supply Adapter](https://www.crcibernetica.com/12v-2a-power-supply-adapter
11
Okay. I have 1 fan set up like the first. a 6-inch fan connected to a cable, a switch, and directly to an outlet with a simple plug. Has worked fine for a while, but I was told later it's a fire hazard, so I plan to change it.
I also have two 4-inch fans that I want to add behind my resin printers to improve the extraction. I already have the vents/tubes/hoses set up, so it's just adding the fast for extra push. I was planning on connecting them directly with cables like the first one, but again, I learned it was a fire hazard. So next I read and saw I should use something like this 3 items combined.
[12V 2A Power Supply Adapter](https://www.crcibernetica.com/12v-2a-power-supply-adapter
16
It's weird. I'm trying transparent Sunlu resin on my Mars 5, and the calibration tests indicate it's still under-exposed, and it's around 3.8 seconds of exposure.
The Saturn, meanwhile its around 2.4 seconds.
09
