nutop

anyone on here with NSPOS? Transactions haven't been flowing over since last night and my urgent ticket still hasn't been answered after an hour.

Local pick up is in Apex, NC. Prefer local but willing to ship to buyers with confirmed trades. Signature required for GPU shipping.

Was going to do a BTF build but ended getting a 5090 FE and decide to roll with that instead. I still have time to return it but figured i'd see if anyone on here wants it first. Only asking what I paid.

Timestamps: https://imgur.com/a/bxxWDNF

Local: 3915

Shipped: 4110

https://preview.redd.it/t35rpti7rmff1.png?width=1080&format=png&auto=webp&s=7e114b469c2eb1d30c3a5f8d46c68537690b26f2

According to FactSet as of today, the float of $PEW is at 109% which means that more shares are owned than what's available.

Institutions/insiders own 88% of this stock now 15% short float or 2.6mm short interest. Institutions increased ownership by 0.5mm or 3% in last 3 weeks Retail owns 115%-88%=0.27 of the float 0.27*17=4.59 shakes out to the last row on the screenshot.

If retail buy pressure gets in on this, we can potentially see a parabolic move quick on this stock. This stock moved 70 cents in minutes on relatively low volume.

Hey all,

Was curious if anyone here is using an Epson TM-M30 or TM-T20 printer with NSPOS?

I'm having issues where the barcodes won't scan most of the time and it seems to be due to print quality of the barcode (lines not being solid). The M30 is way more consistent and only gives me problems every few receipts... the T20 is the opposite.

I have the appropriate settings in NSPOS set (Encode Barcode: Not Checked / EpsonPrinter: Checked) and I've tried reducing the print speed and increasing the density but nothing seems to help.

Has anyone else ran into this issue before? We've been using HP/Cognitive A799 printers forever but becoming more scarce and looking for a replacement. I have an

Hey all,

We have been slowly replacing our receipt printers from old HP A799s as they're getting more scarce to find (and old). We've been testing a few different ones, currently using a TM-M30 and TM-T20III.

Both of these have the same issue where the barcode doesn't seem to print very solid lines so it's a tossup on whether it'll scan or not. I've had more luck with the TM-M30 but it still will produce a barcode that won't scan every once in a while. I've also been proactive and cleaned the thermal head with a thermal head cleaning pen just in case. I've also adjusted the density to 120% and lowered the print speed to Level 7. There's also no Paper Reduction settings in place.

We use t

got super interested in growing these because cubes absolutely wreck my stomach to the point where it's not an enjoyable trip. i also have been looking for something else since I had 2 extremely bad trips on bluey vuittons.

picked up an LC from ITW and the grow was very smooth. probably one of the easiest ones i have done, even.

did my first pick on thursday and took 2g (lemon tek) dried on saturday.

the lack of any sort of body load (stomach ache, tears, temp fluctuation) is an absolute game changer. i did feel a slight something in my stomach but nothing at all compared to what i've felt before. the trip itself was good but not sure if it was because what I took wasn't quite as potent,

hey all!

was curious if anyone else has experienced this or knows a fix... i play call of duty dmz and use voicemod for fun. if i use the voice changer, it will work in game but soundboards do not. it seems to be a specific issue to the game because if i use it on discord (also tested using voice recorder to make sure it was coming through) it will work... just not in the game.

any help would be greatly appreciated!

was originally going to be gone for a work event but it was cancelled. looking for 2 tickets if there's any to be found.

thanks!

hey all,

i recently purchased a mm700 because i was blessed(cursed) with a fireplace at our new house. my big concern with getting this is how far can the mount go when lowered? our mantle is about 54 inches tall and i'm hoping i can get it so the base of the TV is about 30-32 inches from the floor... is this doable?

thanks! (also apologies if this is a dumb question)

so, i've been playing this since launch and maybe have only encountered what I would think is cheating a handful of times.

today were doing duos and we were close to a bounty so we started engaging. my friend was killed but i ran away. the person who had a bounty on them, starts chasing me but i make it to the water and start swimming. immediately starts following me the way i start swimming which i assume maybe it was because i was in shallow but as soon as i got into super deep water i start moving away but every time i do, he changes direction towards me.

i hate to assume someone is cheating but it seemed really off and he was very persistent (taunting me on comms about going fishing).