Source

peppermg

u/peppermg

r/homeassistant•

node-red SSL

I converted my entire hass/node-red setup to use SSL and now the node-red component will not connect to home assistant, I keep getting the '[error] [server:Home Assistant] Home assistant connection failed with error: Connection to home assistant could not be established with config: https://hass.mydomain.com:8123 <password redacted>'

I do not have NAT loopback on my router because CTF is enabled, but I have a pi-hole setup running with routes to all my local ips. I've tried just about everything, but can't figure out why it won't connect. Any help is appreciated.

15
r/1911•

New SR1911 Issues

Took my new SR1911, my first 1911 out to the range this weekend and had a few issues with it. When I first got it I striped it cleaned it up oiled and reassembled it. Took it to the range and on the first 3 mags I put through it the slide would get stuck back when attempting to chamber the next round (really stuck, took a considerable amount of force to free it). This happened once on each of the first 3 mags and it seemed to loosen up and performed flawlessly thereafter, put about 75 rounds through it.

So my question is, what did I screw up? I assume perhaps I did not oil it enough, being my first 1911 I am not sure. Any ideas?

1227
r/bikewrench•

Crankset & BB tools

I have a Giant Defy 2 with a FSA MegaExo BB and a Gossamer triple crank. The BB needs to be replaced and since I found a good deal on a Shimano Tiagra FC4503/SM-FC4500 I will be replacing the crankset as well. What tools will I need to do this? BB tool, Crank puller? I assume I will also need some sort of bike grease.

514