plausocks

always loved g-shock, always hated the band, any easy velcro bands or other bands that arent so "gummy"?

i know it's generally a thing with the 2nd gen, but is it just the ZF 9HP Or is it also the 6 speed? just kinda curious

dont need any but im a bit old school and like to carry a spare, cant seem to find one listed anywhere with any certainty...

Anyone else have this issue?

I'll set the PTT-ID (Menu 19) option to EOT, hit menu to save the setting, check that it actually saved by broadcasting a test transmission, and confirm that its working.

However, after turning the radio off and then on again, the PTT-ID setting reverts to OFF again, and it doesn't seem to matter if i set it in the radio menu manually or via CHIRP...

Possible firmware bug?

and yeah i'm using the recommended radio setting for the BF-R3 that is recommended on the CHIRP website (Radioddity UV-5RX3)

16/8 light cycle, Appx 10,000lm (between this and another plant in the same grow space), GH MaxGrow 10-5-14, DWC with high aeration. Temps maintained around 26℃-27℃, RH40-60%

At the moment it looks like just tight clusters of leaf buds on close inspection but im afraid its a precursor to bolting...

​

One of a few basil plants in a single DWC bucket

​

[Another in the same DWC bucket, looks like its just a day or two behind the other](https://preview.redd.it/ato40vnn9kf61.jpg?width=960&format=pjpg&auto=webp&s=e71366d5f0b82ed5

Feel free to AMA below!

​

To start, the mod. Or at least my version of it.

If you aren't aware of This Mod, its essentially a way to use standard AA NiMH Rechargeable batteries in place of the almost certainly useless, or nearly useless factory battery pack. It involves the cutting and splicing of a few wires, but nothing beyond that. Well worth your time and effort!

​

I Took a slightly different direction than Vance Fry with regards to the mod. The battery mod can be greatly simplified by simply connecting the two positive battery terminals together, instead of moving the ground around and such.

&am