This post was requested by u/ImportantGap7520 after my comment on this post: I take back everything bad I said about the SoloTop. I finally found a way to make it work for me.

tl;dr + pics down below

I'm one of those people who from the start suffered heavy nose & cheek pressure from Vision Pro to the point of 30-60min max usage time even though I don't have any issue being 7h in a Valve Index or Quest 3.
I tried everything from attaching a full BOBO M3 strap, different Apple strap combinations of double solo (side-to-side) or even solo + dual strap, as suggested in the other post.

But none of these options actua

Hey there,

I'm wondering if anybody else had a similar problem.

Whenever I want to start recording a video the "recording started" sound plays, but after ~4s the notification LED blinks orange 4 times & a "du-du-du" error-like sound plays through the speakers.
No video is recorded.

Photos still work fine.

I have factory reset the glasses, unpaired & repaired from the app. During the tutorial on repairing the video recording worked, but once I close the tutorial & try to record a video. Same behavior again.

Glasses & case are on 100% battery.

Anybody got some ideas on that?

Hey there,

I'm wondering if anybody else had a similar problem.

Whenever I want to start recording a video the "recording started" sound plays, but after ~4s the notification LED blinks orange 4 times & a "du-du-du" error-like sound plays through the speakers.
No video is recorded.

Photos still work fine.

I have factory reset the glasses, unpaired & repaired from the app. During the tutorial on repairing the video recording worked, but once I close the tutorial & try to record a video. Same behavior again.

Glasses & case are on 100% battery.

Anybody got some ideas on that?

I don't know if this will be seen as a hot take, but since a major focus of this sub is VR gaming it might be. But here me out:

Why the Apple Vision Pro is the best thing that happened to VR in a long time.

One of the main reasons why smartphones were so easily adopted, was backwards compatibility. I could buy a smartphone and still text & call with my friends & fam who didn't have one. There was no need to "convince everyone of a smartphone all at once".

Early adopters could buy-in, while people with a tougher budget or no tech-interest could wait, and organically experience moments were non-smartphoners would get honest, organic feedback or "try-outs" from their friends

There's nothing I hate more than screaming Quest kids.

BUT

tl;dr: Every thing in existence that was so new & different from anything before has always been driven by the younger generations.

It weren't the old generations that made discos popular, it was the young generations, who wanted a safe space away from the old generations.

It weren't the old generations that made the internet popular, it were the young generations who grew up with their first PC in teenage years.

It weren't the old generations that made social media popular, it was the young generations who transitioned from early internet chatrooms to social media platforms.

It weren't the old generations that made s

I'm sorry for this little rant, but something just snapped tonight and I really need to check if I'm the only one with this:

I really want to get back into TrackMania, I've got so many good memories to the old TMNF/Stadium days and I still really like the core game. But every time I boot it up & it doesn't matter what type of track I pick, I'm met with permanent blind jumps, unpredictable turns after jumps that you basically have to play twice to learn where you need to go.

So often I feel like the camera is just too low, to actually see the track correctly & where I need to go. (Usually using Cam 1)

And if the track layout isn't built like a Kaizo Mario Rom then the (undoubtedly

Hey there,

I'm gonna be away from my Windows machine for the next couple of months but might have some more time during that, so I wanted to pickup the idea of getting into VR gamedev with Unity.

Has anyone any experience how good VR (or Unity in general) works on a 2019 MacBook Pro through Bootcamp? I've read that the AMD Radeon Pro 5x series should be good enough to run VR.

Thanks for any insights 🙏

Since I've sent one of my knuckles in for a RMA I can't use my Index atm and am stuck with using my Quest 2 as my main headset. I even bought a link cable since my router can't do great Air Link and I was hyped to play some of my favorite games on a higher res display than usual. I was shocked how much using the Quest ruined VR for me in comparison. The controls are way less intuitive, missing finger tracking, the just sub-par tracking on fast movements, oh my god the FOV and most horribly the high res display gets cockblocked by the bottleneck of a link cable because the bitrate can't keep up in high speed BeatSaber maps or similar stuff.

While I barely noticed the higher res displays whe

Hey there r/jailbreak,

I've jailbroken my iPhone X with Chimera 1.0.6 (but also happend on 1.0.4). Every night I plug my device in to charge over night. A couple of weeks ago it started, that when I woke up in the morning, my device's alarm didn't go off and when I tried to turn on the device (tap to wake, power-button etc.) the screen won't turn on. Since I wasn't hearing any sounds from it when I should be receiving notifications I assume it completely crashes/hangs.

The only way to get it back is to do a force restart (volume buttons up, down and power-button). The device will reboot into unjailbroken state and can be jailbroken again. When I restart the device before going to bed and l

Hey r/jailbreak,

I'll quickly rundown how I got here:

• My iPhone X was on 12.1 without any jailbreak
• I created an iTunes backup of my phone.
• I installed unc0ver and successfully jailbroke my 12.1
• I experienced quite large battery drains and installed Succession
• I "reset" with Succession – my device rebooted but all my Jailbreak Apps (Cydia, BytaFont, Filza, Succession etc.) still where present, but obv. crashed when trying to open them
• Any try to rejailbreak with unc0ver just rebooted the device and did nothing
• I let it sit like that for a couple of weeks
• Chimera was released – I installed Chimera via Cydia Impactor
• I tried both exploi

Hey there,

so I'm in desperate need of a full-screen webpage view. This means: No Statusbar and no Safari-UI. If I save the webpage as a homescreen bookmark, the Statusbar is still there. Even with tweaks like FadeBar or TapTapBar(?) - the Statusbar is gone, but the black gap still remains.

I've tried install [[SafaReaderFullScroll]], but after enabling the toggle for Fullscreen it won't work. I've tried force quitting and respringing. Still loads in regular view.

Next I tried Flex and the according Patches.
The "No Statusbar"-Safari-Patch worked, but still let the Safari-UI stay up. And the "Fullscreen Safari"-Patch, also after force-quitting Safari won't work.

//e: I may have forgot

So I'm currently writing my bachelor thesis on instant communication and remembered, that with the iPhone Texting switched from an email-like interface to a more messenger-looking style and was wondering if anyone still had a screenshot of the first generation Text/Messages apps somewhere?
This would really help me out.
Thanks in advance!

Hey /r/j,
I was using the beta3 of yalu shortly after it was released and it worked without any problems for me. Was pretty stable from the beginning and I had no troubles resigning and rejailbreaking.

Running iOS 10.2 on an iPhone 6.

But recently I started having trouble. When I was respringing my device it straight up rebooted and I had to rejailbreak. Even this started to get tricky from time to time. I had to do the airplanemode-thing to get it working, usually took 5-10 tries to get in.

But in the last couple of days, my phone started freezing and crashing on unlocking the phone, opening random apps and more. When I woke up today my phone was super hot and the screen was frozen

I'm in love with ColorFlow like everybody in this sub, props to David!
The only issue I have is, that very often I can't figure out whether shuffle and/or repeat are now enabled or not.

###Just have a look at this screenshot for example: http://i.imgur.com/70s9CwK.png

which of Shuffle and Repeat is enabled and which not? ^(Hint: ^Shuffle ^is ^on, ^Repeat ^is ^off)
Having the active one in a more active looking color, would be the final thing to complete ColorFlow.

So I'll leave this here, just as a suggestion for u/GoldDavid or someone to come up with a clever solution.

Have a nice day. ✌️