reign27

u/reign27


r/AskElectricians•

Location: United States, Missouri, assume NEC 2023

I'm currently planning to run a SER cable between my basement and attached garage through a hole drilled in the end joist with a conduit nipple in it. On the basement side, the cable will be above a drop ceiling, and the cable will be secured to a floor joist.

As it's coming into the basement, does the cable need to run from the conduit through a junction box with a clamp? Or is it okay to have to go straight from the conduit opening (with bushing) into the concealed space?

11

r/AskElectricians•

Novice DIYer here considering my first major electrical project. I'm preparing for an EV purchase and possible future expansion, and I'd like to put large (~125A) subpanel in my attached garage, and hook up the EVSE to that. Missouri, USA, local law says I should follow NEC 2020, and I'm planning to get a permit before I actually do anything.

My main panel (200A service) is in an unfinished portion of my basement along the same wall as the garage, but on the other end from where I'd like to put it. Specifically, my garage is a little longer than the house. The part of the (load-bearing) wall against the house is finished (and I think insulated), the part of the wall against the outside is u

14

r/AndroidQuestions•

I've been using RCS with Google Messages for months without issue, then today every RCS message failed to send. When this first happened, I went to the conversation details and saw "End-to-end encryption Status: Off. End-to-end encryption isn't available in this conversation", but the overall RCS status from the top-level settings said Connected still.

After playing around with it for a while, I turned RCS entirely off and back on from Messages settings, and it again says Connected in the top-level RCS settings, but now when I go to a conversation's details, it says "End-to-end encryption isn't available for you". Several reboots after and in-between have made no difference. Toggling "Only

37

r/HalfLifeAlyx•

Edit: Appears to have been an issue with that save rather than the graphics. I rolled back to a previous save, went through the level transition again, and now it seems fine. And I have non-garbage textures! Leaving this post up in case it helps someone else (unless the mods want to purge it).

Since I started playing Alyx, I've had some graphical issues. I get the "Low GPU memory" warning that I see a lot of people say that they just ignore and everything's fine. I had a handful of crashes transitioning levels, but it was generally fine after restarting the game. I also get issues where the textures are automatically downscaled to garbage levels, which I was sort of half-trying to figure o

20


You've reached the end of this feed.