serion

Download the CoinOut App to earn Coins to redeem for rewards. Start earning Coins by downloading https://coinout.com/pages/refer_earn?id=A2J2RW3

Referral code: A2J2RW3

$5 cashback for first time use of Upside app.

Upside referral: BRANDON292245

After the most recent firmware update to 1.3.2.8 my first layer has been awful. I spent yesterday testing and tweaking and found that If I adjust my Initial Layer Flow to 78% or I change the Z-offset to 0.06 my first layer is back to being smooth and even.

Which one is better to adjust and why?

My new K1 shipped with firmware v1.3.0.30. When I check for an ota update from the K1 shouldn't it be detecting a newer version and do an upgrade? When I check for update it's saying no update available.

My new K1 shipped with firmware v1.3.0.30. When I check for an ota update from the K1 shouldn't it be detecting a newer version and do an upgrade? When I check for update it's saying no update available.

FYI -I got it installed, but haven't yet had time to print anything using it. Curious to hear others' experiences with it.

I've used the sample PLA the printer came with, and I received a spool of the Creality Hyper in Black as part of the bundle deal. Both print well and I'll probably order more or the Creality Hyper, but it is only available in a small selection of colors.

Are there other brands of PLA that I should look into that are good and will do well with the speeds of this printer?

At the recommendation of others, I swapped out the stock build plate for a PEI one. The different is night and day. With the stock build plate, I was having adhesion issues. Starting the print, I'd get some clumping during the first layer and then once the print was finished it was near impossible to remove without significant force. I tried coating the stock build plate using a glue stick as recommended elsewhere and that helped significantly but is a pain to clean up between prints.

I received the PEI plate, installed it, and ran the auto-level function. My first print came out perfect with none of the issues experienced with the stock one. My first layer goes down smoothly and ad

What is the best rainbow silk PLA? I purchased one and it has way too much space between colors, so prints are coming out as a single color which defeats the entire purpose of printing in rainbow. Before I try my luck I thought I'd ask for suggestions.

If it matters, I'm printing on a stock Ender 3 V2.