So I already went through a whole process on my bumper... Sanded it down, put filler in, smoothed it out with various grits sandpaper.... 3x Primer paint coats, 4x base coat, and 3x clear coat. I let it cure for a week.... And yesterday I went at it with 2000 grit wet sandpaper to smooth out the edge of new paint Vs old and give it a going over before putting compound on...
Ehh.... I didn't feel I went too aggressive with the wet p2000 but I clearly did.. I rubbed right through the paint in spots and the grey primer is coming through.
So now I'm left figuring out how to fix this.
Would I be right in thinking this should be smooth now, so I should go over it again with wet p800 sand


