u/steeeeeeed
Had 4 footings poured below freeze line at appropriate depth. Contractor offered to drill holes for ABA66Z post bases. He used a 1” bit and went down 8”. I was going to use 5/8 wedge anchors but obviously they won’t work now. Can I use epoxy to secure the wedges anchors? Deck is 10’ x 8’ and elevated just under 8 feet and will be free standing. Appreciate the insight.
Are there any Honda service departments that are worth while? I have a warranty issue on my vehicle (bought out of state) and don’t have the best of luck with the one in NKY. Tried to sell me a $500 part and repair for something that wasn’t even broken.
I have 3 cells that I need to return a value to 1 cell. A2 is the status and will have “open” “closed” or be blank. B2 is the date an order was placed. C2 is the date an order was delivered. I’m trying to create a formula that will show the duration it takes from an order placed to being delivered but also want to show orders that have been placed but not delivered yet.
I tried: =if(and(a2=“”,””,if(and(b2<>””,c2=“”,today()-b2,if(and(b2<>””,c2<>””,c2-b2))))))
And keep getting errors TIA
Forgive my formatting, I’m on mobile.
This set belonged to my wife’s parents and I want to refinish the set. What is the best way to strip the old paint and paint it again? I have a pressure washer but it doesn’t seem to remove all of the old paint. I am assuming the old paint is from rattle cans.
I’m installing a 3-way dimmer light switch on 4-gang box with three other single pole switches. The dimmer switch works but if it is switched “on” the other lights controlled by the single pole switches in the same box all turn off. Do I need to put all 3-way switches in?
My wife wants some floating shelves in our bathroom. What is the best way to figure out if pipes are behind the wall? I know that there is at least 1 because my stud finder thought it was a stud and I used a small nail to check it bc of the placement. It’s a plaster wall. Thanks in advance.
I found some old clothes from a relative that passed away and wanted to get them made into a stuffed teddy bear for Xmas as a gift. Maybe multiple teddy bears if possible. Any recommendations? Thank you in advance.
How long after applying tenacity should I wait to dethatch? Thanks for any advice.
Swinging the tailgate open has resulted in the backup camera wires to be severed. I didn’t see much in this sub on the issue but a lot of stuff came up when I googled it. It’s an obvious design flaw in the gen 2 (or at least in the 2017) and I wondered if anyone else had this issue.
Spots/Price: 48@$5
Total Price: $240
Make and Model: WE Mini Buster
Timestamp/pics: Stamp and Pics
I acquire this about a month ago and haven't used or carried it since receiving. Impressive milling on this knife for sure but just doesn't sit in my hand well so off it goes. Read the previous description below if you want. Also, I know the post said 50 @ $5 but I went back to the old post and realized it went for $240.
Catch and release on this one. It's hard to appreciate this knife without getting a °360 view, or better yet handling it, the milling is very impressive. SNECX Is a mad
Spots@Price: 55@$5
Total Price: $275
Make and Model: Benchmade Bailout with Rockscale titanium scales, backspacer, and unknown pocket clip.
Escrow: No
Up for grabs tonight is a Benchmade Bailout in M4 that has been modified with titanium Rockscale scales and a Rockscale backspacer. The scales have some scratches I tried to capture in the picture. Just normal pocket wear. Blade is in excellent shape, only used to cut a few boxes. I bought the scales, backspacer, and pocket clip with a s30v Bailout and did a blade swap. Blade favors clip side a hair and is nowhere close to rubbing. The original scales or clip d
Won this a few weeks back thinking I needed another fixed blade. Truth is, I don't. Great looking blade and craftsmanship on this thing. First production run. cpm 154 blade. Previous owner had carried and lightly used. Sheath has been dyed (check pics). Solid blade all around.
<raffle-tool>PayPal Info: [REDACTED]
Number of vacant slots: 0
Number of unpaid users: 0
Number of unpaid slots: 0
This slot list is created and updated by The EDC Raffle Tool by BoyAndHisBlob.
1 u/i_donthavea_name PAID
