techypunk

I'm not new to flashing an iso

I tried on Windows with rufus, and android (graphrneos) with etchdroid

Ive tried with 3 different usb drives. Two 3.0 and one old 2.0

I redownloaded the iso 3 times as well.

BIOS is not seeing it. The drive is never readable on any OS, and each OS just recommends formating.

Tried plugging it in to 2 headless debian laptops, windows and androidnafter flashing the OS.

Grabbed a debian iso for shits and gigs and flashed it to 2 of the drives with no problem.

Really want to try this OS out

ISO version:

PikaOS-Nest-NVIDIA-GNOME-4.0-amd64-v3-26.04.04-1.iso

Also, no AV on windows or android. And downloaded with FF or FF forks.

I'm in a different department than the main "Corporate" IT at my new job. Been doing this 10+ years. Still doing admin stuff, but far away from Intune, AD, etc. Hello DevOps and Cloud Engineering. Current company is a bit more "old school" than I was told.

1. If you don't have a password manager in 2024 available for your employees, you're fucking nuts. KeepassXC is not a huge ask to have installed locally as an alternative. (PS they don't have SSO for everything)

2. 8 digit pin is crazy for Intune BYOD (Mobile). 6 is more than enough.

3. No Mac environment? lol. If it's not a cost thing, JFC it's 2024 dude.

4. Check out OOBE for Intune, cause having to call Help Desk after recei

Control Center is asking for admin privileges when adding a new network. They must have swapped something. I did a delayed update for the rest of my users.

If anyone knows of a fix, please post. Apple is denying and my Mosyle says to reach out to Apple.

My users travel a lot. Has been a pain.

I'm running Plex Docker (linux-server:latest) on Debian (No GUI). It's the only image in docker. About once a week I have to restart the container due to extreme slow ess of videos loading locally and remotely. My videos are connected via a NAS and mounted via fstab to Debian.

I'm thinking cache build up or something. I want to automate the fix without having to bounce the container. I can bump up the logs to debugging if I have too.

Documentation is a little all over the place for docker Plex, so sorry for the n00b q.

Cheers!

Searched, and checked top posts. Not much said.

Looking for somewhere with great flower and awesome deals. There are so many fucking dispensaries it's hard to figure out. Been in the area for almost 3 years. Normally just go to Attis Trading on Cully.

I don't need top shelf, but don't want Schwag. Love the sub 100 half zips or zips. Also do a lot of carts.

Running rclone GUI 1.65.2 in docker.

Essentially I wiped my RAID configuration to upgrade. Before doing so, I copied all my files from my storage to a Backblaze b2 bucket. I have 4.5 TB of files.

Now that I recreated rclone, added my b2 bucket, and added my local NAS, I keep getting "directory not found". When I turned on logging it was the same error. But if I need to log the errors I will post.

I tried with FTP (it's local so I'm not worried about it being unsecured) and with SMB. I double check file permissions, and I can create directories and copy single files from rclone. Which is fine, but I'm not sure why I'd need to create the Parent folder and all children folders for it to co

I'm just a noob to rclone, not linux or docker.

I'm doing a large-ish file transfer to BackBlaze (5TB)

I have the 5743 errors on the GUI

Bytes Transferred:3.24 TB
Average Speed:37.59 MBPS
Checks:0
Deletes:0
Running since:21 hours
Errors:5743
Transfers:13754

I wanted to see the log file of the transfer. I docker exec -it $containername /bin/sh into the container and it's not in the user folder /config with the rclone conf or in /var/log

Documentation is all over the place, but I'm seeing it might not be logged automatically?

Just trying to prepare as much as possible.

Had to replace my starter on a 2007 Jeep Grand Cherokee 5.7 Hemi RWD.

The plastic cover and the spade connector broke. (The bolt on connector is fine) I cut the cable, crimped a new spade connector. Solid, started up, glad to have a working car again.

Was worried about it being slightly loose, added extra heat shrink from over the spade connector to where the splice was made. I was worried the spade connector would be slightly loose without the plastic cover. Sprayed some electrical liquid tape on the spade connector, then connected. It ain't moving.

Starts up just fine (started fine without the extra heat shrink or conductive glue)

Am I just being paranoid? I have rigged way worse

Nova usenet was in the wiki. I'm trying out a new providers and Nova uses UsenetExpress.

I bought 1 month last night and I'm just getting timeout errors on multiple downloaders.

I contacted support, and no contact back yet. Didn't find anything in search.

Anyone else having issues?

#!/bin/bash
cd $filepath_to_DMG && curl -L -O $CDN_Path)
hdiutil attach $_DMG_Name.dmg
hdiutil attach $filepath_to_DMG
cp -R /Volumes/Slack/Slack.app ~/Applications
hdiutil detach /Volumes/Slack
rm -R $filepath_to_DMG

My script is above with redactions.

Mosyle support recommended a Custom Command. I need to get rid of the Slack Helper pop up. Slack recommends installing to ~/Applications. Then users can update.

I'm having issues with 2 things.

1. the dmg won't download via curl (ticket open with them)

2. When I cp to /Users/$USER/Applications it saves it to /Users/Applications instead of the logged in user. When I cp to ~/Applications it saves it