thefooz

So, to start with, I have two perfectly functional ICE cars, so I’m not under any pressure to lease or purchase anything right this second.

With that said, I find a broker offering an extremely generous 24 month lease on a ‘24 limited. I have a friend who owns the same car and I had a blast driving it. I’m really tempted to jump on the lease and sell one of the cars (putting the proceeds in a high yield account).

The thing is, I know the refresh will be here in just a few months and has some substantial improvements. I don’t mind waiting a bit, but I have a feeling the lease rates on the ‘25 won’t be nearly as good as what I’m being offered, and I’m guessing dealers will try to sell them

I haven’t had a chance to try it yet, but if someone wants to give it a shot, here’s the URL:

https://www.amd.com/en/support/kb/release-notes/rn-rad-win-2340-01-10-preview

Obviously you’ll need to side load the drivers on the Go.

Would anyone happen to know if there's a way to force ES_DE to stop automatically searching for ROMs every time the application is started? It makes it so that each startup takes about 3 minutes and is frustrating. I'd like to only do manual ROM scans. Any thoughts?

Hi everyone, I have a chance to pick up an excellent condition used rp3+ for $100. I have an ROG Ally, but this would be my first small pocketable SBC. Is this a worthwhile deal?

Hi there,

Would you happen to know if most eGPU enclosures (or at least TB3 ones) would work with a 40gbps USB4 port? I'm still confused as to whether you explicitly need TB3 or if having the port be 40gbps is sufficient.

Sorry, I'm brand new to the world of eGPUs.

So it appears that either the new AC update or the microcode update broke functionality in handheld companion.

I had my M1 button configured to bring up the quick tools menu. Post-update, I can no longer use that hotkey. HC doesn't even recognize when I press the M1 or M2 buttons. I tried binding the menu to multiple other sets of keys and the menu started popping up, even when those keys weren't being pressed.

Has anyone else run into this?

I visited New Orleans a few years ago and had a life-changing dish called BBQ shrimp at Mr. B’s Bistro. I’ve been trying to find a comparable version in LA since, but my search has been fruitless.

Little Jewel was a complete disappointment and the few other places I found serving the dish were missing the richness and oomph of the Mr. B version.

Does anyone have a lead on a good version of this dish?

Hi Everyone,

I just upgraded my printer to the 2.2.1 silent board. I'm running Klipper, and just ran the ringing tower model to test acceleration and reconfigure input shaper.

On the original board, the ringing tower would get up to ~9,000mm/s^2 before layer shifts began. On the silent board the layer shifts are beginning around the 4,000mm/s^2 mark.

I saw some reports that the TMC2208 run hotter than the stock steppers. Is there a chance that heat is causing the layer shifts at a lower acceleration rate?

If so, I was considering upgrading to silent fans regardless. Maybe I'll just go with larger ones.

I also saw some reports of TMC2208 issues with pressure/linear advance (apparently th

So, I'm kind of stumped. I'm running a Sovol sv01 direct drive printer with PLA+. I printed some form-fitting cases a few days ago and noticed that the heights were inconsistent.

Last night I printed 6 M5 nuts (~3.5mm z height). Every single one came out at a slightly different height. I got everything from 2.6 to 3.2mm. These were printed individually in the exact same location on the bed using the exact same gcode. Looking at the nuts from the side, I noticed that they seem to start a bit wide (almost like an elephant foot, but not as exaggerated) then bow inward until about the halfway point and then extend back out near the top.

Slicer is Superslicer. I'm running a fairly well-tuned ve

Hi there. I was gifted a $20 GameStop gift card, but my entire game library is on steam.

Hi everyone, I've got 2 Mephisto sour stomper autos in my 2x4 that hermed hard (found and pulled about 40 pollen sacks between the two). We've had a few weeks of 100+ degree temps, so I'm guessing it was due to stress. They're about halfway through flower, and I don't have any other plants going, so my thought was to keep both and keep hunting for pollen sacks. I'm guessing I'll probably miss at least one and end up with some seeds, but it seems like a shame to chop them at this point.

Any thoughts/suggestions?

Do you guys know if the firewood 7 comes up for sale immediately at 9pm est? I'm not seeing a restock.