therealroulette

The "Driver Documentation" PDF that comes with the SDK, states (page 18):

HTTPS, SSL, SSH, WWS, and other protocols must be implemented by the driver with its own custom transport class.

However when I am working in the initialize method inside the main driver class, I can declare

var httpsTransport = new HttpsTransport

and I can use it in the initialize call

httpsTransport.Initialize(ipAddress, port);

ConnectionTransport = httpsTransport;

BlurayPlayerProtocol = new VideoPlayerProtocol(ConnectionTransport, Id)

{
EnableLogging = InternalEnableLogging,

CustomLogger = InternalCustomLogger

};

So my questions is, do I still need to create a custom transport class

Not creating to be certified by Crestron, just looking to learn.

When is the JSON file read (where in code) I have it embedded in the project, but I never see anywhere in any example where it is referenced (I don't even see Newtonsoft.Json library being used. I'm following a pdf that came with the SDK, I haven't loaded it to test yet, just curious.

I’m looking for cooking lessons as a date idea. Does this exist?

What is the best way to handle a static route with Control Subnet?

​

Basically I am talking to a Just Add Power system and the network switch is at 192.168.5.200, from what I understand, if I want to talk to one of the JAP receivers, then I must open a telnet connection to them (they are addresses at 10.0.3.xxx). I have been informed by tech support that I should change my default gateway to 192.168.5.200, so when I start that telnet connection the CS will route to the net switch.

​

There has got to be a different way. Any suggestions?

I understand that Crestron and Atlona use multicast on networks. From what I have heard, Just Add Power uses VLAN switching. Can anyone explain the pros and cons of each, or can you point me in the direction of information?

​

I have a salesman that is hell bent on selling Just Add Power (I don't know much about it), we mainly use Crestron and Atlona (Control4 systems and Crestron systems).

I know it is still early, and they have to do the EU Masters, but does anyone have an idea when the exams will be released? I know last years were released WAY LATE.

They used to list this when searching for dealers, why don’t they do it anymore?

The bottom of the product page state: Affordable audio distribution for six rooms, expandable for up to 24 rooms.

​

What stops me from adding more than 24 rooms? I can add as many amps as I want to in SIMPL. Is there really a limit, has anyone done 29 rooms using these amps?

Company is growing, we now have a few Crestron programmers (I used to be the only one), and I'm running into what I think is an issue. Basically going behind each other and not being on the same release of software, sometimes it creates issues other times it fixes issues. How do other teams of programmers handle keeping everyone on the same version of software or is this something I shouldn't worry about. My brain is telling me not to update unless there is a reason (new feature, new devices, etc), if the version of software I'm running works, don't fix it.

What do y'all use?

We've been through Araknis, Engenius, Luxul, and Apple. I'm looking for something with Cisco, we do high end residential and I want to sell brands that have been around for 30+ years

What can I do and not do with the C100? Has anyone integrated with SIMPL?

​

Basically I have a client that wants an interface similar to the Logitech codec but they want some room control and extra sources.

I'm replacing an older Crestron touch panel (composite video input), I can't fit a 15" panel in the space. Has anyone sent HDCP video to a TSW-1060? The DM-TXRX-100-STR doesn't stream HDCP protected content.

I can get it to work on slot 1 of a DMPS3-300-C but not slot 2.

​

"proguptime" show slot 1, ive tried the following and no success:

"proguptime -p:2", "proguptime 2", "proguptime :2", "proguptime[2]", "proguptime [2]", "proguptime2".

Nothing works, I have also tried the above with the number 1 and it doesn't work either, what am I doing wrong?

help returns:

​

DMPS3-300-C>proguptime ?

PROGUPTIME[:program#]

program#: number of program to execute. (default=1)

No arguments necessary.

My goal is to have a program send the .vtz file.

​

I am just playing around in SSP. I would like to know what file path it has to load to an a console command to load it, also if there is a function already in SSP.