thewarring

I noticed that in a some of the shots, seemingly from the "B" cameras, there is significant red/green splotching. And it's not limited to low-light shots either.

One shot that really stood out to me was >!when Egwene was thrown into the river. When she starts floating, there's an overhead shot that tracks down the river with her.!< In what seems to be direct sunlight, there is a lot of splotching that I'd normally consider to be from high ISO.

I suppose it could be from cropping in on much wider shots, but I'm not sure.

This just started happening within the last couple of weeks. When I run a speed test or upload a large file to a high-bandwidth destination on my Win10 desktop, routers 5 GHz wireless stops working. I noticed that it would stop working when the speedtest was ramping up, with it failing at 320 mbps on the upload speed test. The 2.4 GHz network stays up though. I do not have the same issue occur with my MacBook Pro, which will pull 550mbps in both directions when right next to the router without issue, and will pull roughly the same speeds as the desktop when I put the MBP near the desktop.

So with that, I know it's not location or any sort of weird issue with the router not handling the band

Still unlicensed.

When I'm driving to/from work, I'll be listening to some guys talking on the local repeater, but when I get to one part of the highway that's elevated to clear some train tracks, I can hear a weather station being broadcast on that frequency. The frequency in question is 146.940, and I can't find any weather repeaters in Repeaterbook for over 300 miles operating on that freq.

Is someone locally rebroadcasting the weather station onto ham Freqs? From what I can tell, the broadcast is the local weather channel which would be 162.550.

I can provide location info, but I'm just really curious about this.

Being able to monitor multiple subreddits for the same thing would be great. I don't know if this should be done via multiple monitors or by being able to select multiple subreddits in a single monitor, but either one would be great!

I have a GTX 1060 that recently stopped working on me, and of course this happened outside of it's warranty period.

The card has no display signal, but is recognized in Computer Management and Task Manager. I know it's working because I've booted it while the display was plugged in to the GPU, and was able to remote in and see it was in fact displaying and using the GPU and not integrated graphics. I've tried all of the DP Ports (tried 2 separate cables, and made sure the second one was high quality and not feeding the monitor 5V), as well as the HDMI and DVI ports. None will display.

I've tried all possible PCI-E slots and have reinstalled drivers multiple times, including installing old

She can Facetime me though. I've also deleted her phone number off her contact and re-added it. What am I doing wrong??

Here's my build as of right now.

I currently have the 2 standard 120mm fans that came with the case in the front, as well as the 120mm in the rear.

I'm adding the 3 Thermaltake 120mm Riing fans to the front of my case, but I realized that I don't have enough PWM headers on my motherboard to support them plus the 2 original fans that I'm relocating to the top, along with the one for the rear. I don't need to worry about the CPU fan, as it already has it's own header for control.

Would[ these two ](https://www.amazon.com/Electop-Splitter-Sleeved-Braided-Computer/dp/B07546QTT5/ref=sr_1_8?ie=UTF8&qid=1525361797&sr=8-8&keywo