thrav

Anyone who is attempting to maximize yardage while “sliding” is not actually giving up. They’re just attempting to gain extra protection from the big hit they’ve already committed themselves to receiving.

If you’re giving up, you must hit the turf ASAP, not take a euro step and launch yourself another several yards feet first.

Who has the replay from FSU? Real time, you can’t even tell he’s sliding until the defensive players have already launched.

—-

Just checked replay and the line judge was marking 48, which gives him +2 from where he could’ve been interpreted to initiate. When ball is at the 48, both defensive players already have their heads down and are fully committed to the hit.

It's hard to say what fixed this, but it's working now. Here is what I did, after everything below.

1. Pull everything out of the case

2. Disconnect everything, except CPU

3. Pull CMOS battery while PSU is disconnected, let it sit a few hours

4. Connect PSU CPU+Motherboard cables + Replace CMOS battery

5. Flip PSU switch to on. DO NOT HIT POWER RIGHT AWAY. Count to 30.

6. Power on. Pray for [Debug = 10]. Yes > Goto 9 || No > Goto 7

7. Power off. Flip PSU switch off. Hold power until you hear PSU click twice (Probably 20-40 seconds).

8. Detach the cables from the board. Reattach cables. Wiggle them a lot. Check fan cables. ^ --Goto 5

9. Power off. Flip PSU switch off. Hold