FolderMeter: Monitor Capture One Session size/stats in the macOS menu bar
github.com/titleunknown/FolderMeter
github.com80
titleunknown
u/titleunknown
github.comFolderMeter: Always know your Capture One session size.
fainimade.blog/2026/03/foldermeter-always-kno...
fainimade.blog303
4917
Hi fellow fly anglers.
I'm going to be traveling form the states and bouncing between Killarney, Kenmare a few days then a few in Cork. (My first time so a bit clueless about the whole area) I'll be staying at Sheen Falls for a night and will have access to fish there one day. I'm hoping to get some recommendations on other spots near by for mid/late May. Which shops are worth a visit? Any general pointers for a first time visit.
Been reading up on River Laune and seems Beaufort might be easy access. Along with salmon, sea trout, and browns, I'd Also interested in salt water (from shore) for bass, cod, wrasse or whatever. Ultimately hoping for whatever I can get into without much fuss. Se
11
I have been needing to resize boxes a lot lately and wanted to try to make my own simple tool to do so. This is what I came up with increments of 0.5" along the 6" rail.
It's 3 pieces. Needs a few screws and threaded inserts. Went with PLA-CF but might change the point end design down the road If I find it wearing too quickly.
Files available over on MakerWorld and Printables. (includes .stp and .f3d if you want to mod it)
h
96
Im still learning how to make proper drawings to send out to job shops.
About to send out a drawing and .STP to a shop but wanted to double check a few things before looking like an idiot and wasting their time with questions I can answer in my drawing. I've done similar plates with them in the past but with far fewer holes and all the same size.
It's a relatively simple plate with many tapped and untapped holes.
The main questions I have are:
1: If I want all the holes chamfered 0.65mm x 45° is the detail of B-B adequate to note that? Or should I also include that in the notes as I currently have.
2: Would it be fine to just note "chamfer all holes" as the dimension isn't criti
13
Once again doing a Digi-Tech Survey. It's open until Sunday October 20 and just take 2 minutes to complete.
You can learn more about it HERE.
If you want to check out the one from last here's the Reddit post with the link to the results.
150
For the past month G Maps on AA has been only showing navigation in the overhead view. Anyone else having this issue?
Using a fully up-to-date Pixel 8. AA Wireless adapter (up-to-date)
This issue isn't just with my head-unit it happens in other vehicles with OEM and non OEM head units wired and wireless.
If I pan around and select re-center it is still just overhead view and not following.
33
I have a Fulla (SCH-19-2) that has slight popping/cracking when any audio is playing. Happens on both on the front and rear output with speaker and headphones.
Troubleshooting steps so far.
- Swapped micro USB cables (with and without ferrite chokes)
- Swapped USB ports, also tried through a powered hub.
- Powered Fulla with a USB charger and just by the mini USB input.
Computer is an Intel NUC Extreme 12 with Win 11 fully up to date.
When I connect to my Macbook Pro I don't have any popping/cracking issues. So it's not the Fulla. Any advice on how to eliminate this?
10
Ursack Allmitey Bear Bag
Used once. $100+$10 shipping (US only)
PayPal
41
