
voltij
u/voltij

New home closed March 2024
While they were still working through my 1-year warranty items, last week I stepped out of the shower and noticed a bunch of grout under the door falling out, and apparently a tile had worked its way out about 1/4".
album of "before" pictures: https://imgur.com/a/sOjpnWM
I asked my warranty rep to add this to the warranty, he said OK.
Today a guy from the flooring company came and did his work. He replaced the left tile.
I noticed 4 new spots of damage on the bullnose trim including one super ugly crack/scrape, one new chip on the tile that wasn't replaced, the new tile is not installed plumb, he wrecked up the baseboard trim, and didn't install grout above
Every game he hotdrops
Gets 10 to 15 kills [unless he is killed by another real player]
One time I found him and sat in a weird location and he literally stared at me thru a wall before coming out preaimed at me. He never heard me.
Then once he has killed 10-15 people he gets in a car and jumps out to suicide
It flew over south Columbus 3 times? Or maybe 3 different planes? All not showing up on flight trackers...
Today I got a little ahead of myself on a thermostat swap.
Gas furnace with outdoor a/c unit
Old thermostat is some Honeywell
New thermostat is Nest 3rd gen
I pulled off the cover of the Honeywell and everything looked as I expected (YGCWR all as expected colors Yellow Green Cyan White Red)
I did not notice that I also pulled out a Black wire and did not note/see where it was connected to. Did not take a picture and feel dumb about it.
This Black wire runs to a wire nut inside the basement unit where it becomes a red wire running to the outdoor A/C unit.
My belief is it previously was in the Honeywell "K" position
Honeywell backplate (empty): https://imgur.com/v2BlgFV
Inside f
Floor 4 of a Balladin Cruciball 17 run, my inventory is initial loadout + 1 Refreshorb.
Sorry if this is a common post, but it's hard to search for these terms as they are so common
External drive is: https://www.amazon.com/gp/product/B0BB8SWB4X/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1
You can see in the reviews that a lot of people are complaining about a clunk noise every ~3-5 seconds even when not actively being used.
The clunk has happened since purchase. My question is if the clunk is associated to the drive or the controller?
AKA: Will the drive go silent if I open it up and drop in a WD Red?
Flock is an automated license plate reader that automatically databases every car that passes by any camera. I drive by about 6 on my way to work.
https://www.reddit.com/r/privacy/comments/1blx2wo/flock_safety_a_brand_new_company_that_is/
I just moved into a new build a few months ago.
This morning I was greeted by a new lil' buddy on the Ring camera.
On further investigation, I found a new hole under my driveway.
Note: We already knew some soil was settling on this edge of the driveway. Picture below is from 2 days ago.
What do I do?
I'm turning 38 this year. I have a degreee in mechanical engineering (bachelors only) and I have been working in the field for almost 15 years doing some type of engineering design and detailing. I have held my current full time position for almost 8 years and it is relatively low effort and decently paying. I work unmonitored and can do whatever I want when I'm at my desk as long as the work gets completed, and the work is not very challenging.
Over the last two years I have turned what most people consider a hobby or leisure activity into a consistent money making opportunity. For both 2022 and 2023 I have filed my taxes with schedule C, reporting 100% of my self employment income. Earlie

I picked up a FLIR One for $200, long story short is I'm getting a new build home in a couple of months so the Youtube algos picked up on that and started serving me home construction & inspection videos.
Got it yesterday, set it up and immediately found a large square of cold on my ceiling.
The first pic has brightness/contrast boosted to highlight the colors, it's barely noticeable by eye. The surrounding areas of ceiling are ~71F, it is about 15F outside when taking this picture. This is a single story dwelling with vaulted ceilings built in 2012.
Maybe I'm missing something, hoping someone here will confirm.
I've tried the ThinQ app and through the control interface, my goal is to set something like the following for every load:
"Normal wash" - Temp: COLD, Spin: HIGH, Soil: MEDIUM
But after running the one load, if the washer ever goes back to "power off" (due to idle), the next power-on resets everything to defaults, specifically Temp: WARM
Also tried going into Options and turning on "Cold Wash", which also resets back to Off upon the next power-on.
Did my best at recreating the (simple) melody, might be a bit out of key but the relative note spacing and tempo are close
https://onlinesequencer.net/3647593
Most of the song has sorta reggae rap (toasting?) i couldn't make out any lyrics though, reminded me a bit of how MCs rap over jungle beats
In July 2020 my girlfriend moved from Virginia to Ohio to move in with me. A few months later we retreived her car from her previous residence which is owned by Mom in Virginia. Here's the rest of the details in list format:
- I am 35, GF is 30.
- The car was purchased in 2014.
- At that time, GF had no credit so her Mom took out the loan, bought & insured the car outright.
- GF made $200-400/month payments to her mom for many years until the car was paid off.
- Mom is named on the title and insurance. Mom is in possession of the title. Mom has been inactive/unwilling to send a notarized title to GF to transfer ownership.
- GF's first option would be to keep the car. Also is not oppose