Sealant Help
reddit.com/gallery/13gty9cPosted May 13, 2023, 9:56 PM UTC
Posted May 13, 2023, 9:56 PM UTC
I asked a similar question a couple of weeks ago and many people suggested ProFlexRV. I now have some and plan to use it next weekend.
I remembered that post and looked but must have scanned over it thanks for the help.
I would use Geocel ProFlex to reseal the trim.
The plastic covering the gutter mounting screws can be purchased at a dealer or e-Trailer and probably on Amazon. I'm not sure what its formal name is but it is easy to replace.
For the cuts in the coroplast I would use Gorilla tape or other high quality waterproof tape. be sure to clean the area well before applying the tape or it won't last long.
Gorilla tape
Unfortunately it gets crusty like most other duct tape and starts to fall off.
Most dealerships should have tape expressly for underbellies. I've seen a couple of different styles and they both work really well.
I’ll take a look thanks.
I’ve tried a few different underbelly tapes without much luck. I’ve found stitching it back together with zip ties works best.
It's got to be super clean. I wipe them down with denatured alcohol a few times.
Zip ties are good too.
4th picture is called screw track cover, easy to replace and not costly.
Yes I just couldn’t find it when searching I kept getting slide seals and D seals.
For the under belly coroplast you can use the Gorilla waterproof tape, it’s much like eternabond, sticky as hell and holds up great. I had to make some cuts in the belly for a leaking pipe and put that tape on, in ~30 degree weather and it’s been holding strong for the last few months and 3k miles. I prepped with denatured alcohol and ran the heat gun over it to make sure everything was clean and warm.
For all the joints take the time to really clean them up, get the old sealant off with a plastic scraper and wipe down with alcohol. You can get plastic scrapers that look like straight razor blades, and they work in the same holders/scrapers
Picture #4 is insert trim, I picked up a 9 foot roll from an RV repair shop while on the road, installed it in a few minutes. Just make sure to look how the old trim is in there, and slide it in from the top or bottom.
the first 3 are probably just a silicone sealant. most people on here say dont use silicone, but more than likely thats what it is.
Clean up what is there the best you can and use Proflex RV to re-seal the corners. For the underbelly, looks like it was opened up once. Gorilla tape works great there.
That’s what I was thinking for the underbelly thanks for the proflex recommendation.
Proflex is non silicone which is what you want. Once you put silicone on, nothing else will stick there. So once it fails (which it will quickly) nothing else will work..
I actually added Gorilla tape on my underbelly after the stuff the dealer put on fell off within a month. That stuff holds up great.