Currently I have been struggling to understand which charge controller I want to go with. In simplistic terms I want to add roughly 800watts of solar to my RV with the possibility of room for expansion. By doing this I have a few options.
Panel specs
Watts - 200 VOC - 36.5 ISC - 6.86 Series Fuse - 15amp
Option 1
Run two separate solar arrays. Each one being 2 panels in series with an option to add a third. Would need to run a 150/45 MPPT controller on each. Not ideal because of the possibility of adding newer panels to an older array.
Option 2
Run one single array with a 2s2p approach. According to specification I would need a 150/60 MPPT controller. This seems very excessive since