My setup - In a small bedroom.
Image.
Overview
- GCQuad.
- Optoma UHD35STx.
- I forget the mat but I cut a hole in it and off of of a Fiberbuilt insert.
- Carl's premium impact screen (7.7' x 10').
- FSX, TGC2019, and I very recently got GSPro.
- Same gaming PC I got at Best Buy.
- The room is 12' x 13' x 10'.
Enclosure / Impact screen
My room is really tight. I can hit a driver but I get within 12" of the back wall and screen on a full driver swing. I used a Carl's DIY enclosure in the garage of my last place but it requires way more depth than I have now. I'm pretty handy so I cut up and modified the canopy fittings, and threw out everything but the screen. I built a new frame out of 1" EMT that's only 8" deep. I covered the back wall with plywood, mounted the EMT frame to the wall, hung 5" of memory from on the back against the plywood, and then 2 weighted blankets to the screen. The screen hangs down, I omitted the bottom piece in the front because I didn't want low shots to hit anything hard.
I have big curtains on the sides that I can retract. I haven't really needed them. Not pictures is I boarded up the windows with plywood. My girlfriend loves that. We made it look fine from the outside by hanging curtains in between.
Mat
I got a pretty nice mat that was well recommended but after heavy use for a couple months, my elbow started to hurt. I cut a hole in the mat and put a Fiberbuilt insert in and my elbow has felt great ever since.
Software
I started out with FSX. That's what I was used to when I got the GCQuad. It's still my favorite software for practicing. I really enjoy playing rounds on it too but the graphics are so ugly that I eventually got TGC2019. I absolutely love the graphics on TGC but the ball physics were diappointing. I recently moved and set up my sim again. In the process, I was persuaded by some folks on here to try out GSPro.
I like GSPro. I'm not sold on it yet. I think it gets a lot of things right. But the UI is really clunky. For example, to view a different part of the hole, you press F5, then hold down shift or something, then use keys W, E, S, D (whatever), to fly around? I don't get it. Or if you want to just see the green, you can hit F3, but then you can't view the grid line or move around at all. Trying to analyze where to hit an approach shot is a PITA. There are just a lot of aspects of the UI and the graphics that don't make sense to me.
But none of the softwares are perfect and I really do like it. I'm trying to learn how to use it and I'm optimistic it'll get better. I'm not convinced it's better than TGC2019 for playing rounds yet. And neither of them are as good as FSX for practicing. GSPro is way better than TGC2019 for practicing though. TGC is not meant for practice.
Also, while I'm here, what's the penalty for being in a bunker? I still haven't found anyone online who has talked about that. GSPro has "light rought" and "heavy rough" shot penalties listed but that's it.
Other
I'm not sure what else to mention. Lmk if you have any questions.
Posted Jul 4, 2023, 7:01 PM UTC
Looks sweet, Lefty.
Thank you! 🍻