_145_

u/_145_


r/Golfsimulator•

Image.

Overview

  • GCQuad.
  • Optoma UHD35STx.
  • I forget the mat but I cut a hole in it and off of of a Fiberbuilt insert.
  • Carl's premium impact screen (7.7' x 10').
  • FSX, TGC2019, and I very recently got GSPro.
  • Same gaming PC I got at Best Buy.
  • The room is 12' x 13' x 10'.

Enclosure / Impact screen

My room is really tight. I can hit a driver but I get within 12" of the back wall and screen on a full driver swing. I used a Carl's DIY enclosure in

99

r/Golfsimulator•

I switched rooms for my golf sim and my BenQ TH671ST no longer fits. I bought a 4k projector to replace it.

Tech:

  • Optoma UHD35STx projector
  • NVIDIA GeForce RTX 2070
  • GSPro (I have Foresight and TGC2019 too)

Now I have a 1080 monitor and a 4k projector. I mirror the display and can't, for the life of me, figure out how to display things in 4k. I figured I could have a 4k resolution and somehow step down via the NVIDIA card the graphics to 1080p for my monitor, but nothing I've tried works.

Questions:

  1. Is what I'm trying to do possible?
  2. If not, I'm going to buy a 4k monitor. Do I need to find one with the same refresh rate or any other specs? Or will any cheap 4k monitor work?
38

r/HomeImprovement•

Hi all,

I'm fairly handy, I've done a lot of stuff myself since becoming a homeowner. But I've never done any real plumbing. I've run supply lines, sweated copper, replaced angle stops, and replaced a couple toilets and a water heater, but I've never messed around with any of the waste lines. They're all cast iron and it just seems a bit intimidating.

I'm going to add a half bath under my stairs and I've tried to get a few quotes for the plumbing rough-in. The quotes so far have been so high I'm wondering what I'm missing. The 1/2 bath is directly above a 6' tall crawl space and about 10' from the main cast iron waste stack. There's also water supply lines nearby in the crawl space. So the

23

r/HomeImprovement•

Hi all,

I'm fairly handy, I've done a lot of stuff myself since becoming a homeowner. But I've never done any real plumbing. I've run supply lines, sweated copper, replaced angle stops, and replaced a couple toilets and a water heater, but I've never messed around with any of the waste lines. They're all cast iron and it just seems a bit intimidating.

I'm going to add a half bath under my stairs and I've tried to get a few quotes for the plumbing rough-in. The quotes so far have been so high I'm wondering what I'm missing. The 1/2 bath is directly above a 6' tall crawl space and about 10' from the main cast iron waste stack. There's also water supply lines nearby in the crawl space. So the

12

r/ecobee•

The System Monitor only has data for "inside temperature". If I have a thermostat and 2 room sensors, what is "indoor temperature". And, more importantly, is there a way to view all 3 of my sensors on a chart like the System Monitor?

I'm trying to make my house more energy efficient so I want to see how different regions of my house change temperature throughout the day. To do this, I need to be able to view a chart of historical temperature for each sensor. I can find no way to view anything other than the current temperature for room sensors.

22

r/1Password•

Mac + Chrome (though Safari is the same).

What happened here? All of the info online says to enable this checkbox but that no longer exists. When I enter new login credentials, and submit, nothing happens. No prompt, no asking me if I want to save them. I guess the only way to save new credentials is to manually click a button before submitting the form? That seems like a major downgrade.

Is there a way to fix this?

35

r/HomeImprovement•

Sorry, I'm a bit lost here, I'd appreciate any help.

Image here: https://imgur.com/a/6TROks4

I have an old Rheem furnace. I don't have AC, just heat. It currently has only 2 wires (red + black) and I wanted to add a smart thermostat so I ran 18/5 wire from the thermostat to the furnace so that I can have a C wire. I attached the wire the same as before: Red to R, White to W.

I added the pigtail. Previously, the black wire went directly to the "C" terminal on the transformer. I added the pigtail so that the blue wire could also go there. But the other end of the blue wire isn't attached to anything right now.

After I ran the wire, I hooked the red and white up to my current thermostat and

115

r/1Password•

I got a new computer and installed 1Password on it. I have 1Password on 2 other computers and my phone. For some reason, on the new computer, it always submits login forms after doing auto-fill. I absolutely hate this. I sometimes have multiple logins or don't want it necessarily sending my info to a site without me reviewing it first. All of the threads on this topic seem to point to old UIs. I've searched everywhere and see no setting to prevent this behavior.

I'm on Mac + Chrome.

311

r/cronometer•

I use an apple watch to track my activity level. I haven't done anything and starting today, it stopped tracking it. I think all Apple Health data is not getting synced.

Has anyone seen this? It sort of ruins the entire app for me and I can't find anything. I don't know why today it would suddenly stop working. I've deleted and reinstalled the app. Turned syncing off an all. Verified the app has permission to read Apple Health data. Verified Apple Health has my activity data. Nothing has worked.

57

r/Plumbing•

A follow-up to this post and more questions.

Update:

Where I'm confused now is:

  • I don't think there's a flange? That silver piece looks like a flange spacer (based on googling) but there's no downward pipe into the cast iron drain pipe to make it look like a flange.
  • The drain pipe has an [outside diameter of about 4.5"](https
15

r/Plumbing•

tl;dr: What is the rough-in?

Pictures: https://imgur.com/a/7TuKlTw

I bought a house and one of the bathrooms has an old high-tank pull-chain toilet. I'm trying to figure out the rough-in so I can buy a replacement. I thought this would be easy but it appears to be a 9" rough-in? But I'm not really sure if I'm correct. Can anybody tell?

Or do I need to remove it to determine the rough-in?

I'd note it's not trim but wood paneling behind the toilet. The paneling extends 48" up the wall or so.

Bonus points if you can recommend a toilet with minimal depth but an elongated bowl. I was looking at a Toto Ultramax II but as they only come with a 12" rough-in, I'm starting my search over.

213

r/HomeImprovement•

I'm curious if people have any strategies to determine a ballpark cost for work they want to have done? I realize the devil is in the details but I have had no luck getting even a rough range of prices for a job. Should I call local GCs and ask for wild, off the hip guesses? For example, I have 3 bedrooms and a bathroom all together on one side of my house and I want to essentially turn the area into a 1/2, ie: add a bathroom, move 2 non-bearing walls, make 1 large bedroom, and make the current bathroom slightly bigger (and remodel it).

I've looked at national average numbers on random websites but I'm in San Francisco and those numbers are nowhere near what I've paid in the past.

As an as

222

r/HomeNetworking•

EDIT: Resolved

I ran cat5e and cat6 cable throughout my house. There are 8 jacks that all go to a Unifi 16 POE Lite switch. I have an AT&T gateway (BGW320), I plugged it into one of the jacks. My expectation is that the other 7 jacks should have wired access to the LAN and internet.

4 of the 7 jacks work as expected. I can connect my computer (Macbook Pro with the monoprice usb-c to ethernet adapter) to those 4 jacks and everything works great.

The other 3 jacks do not work. If I connect to them, I have no access to the LAN or internet. The port on the switch does not li

513

r/DMV•

I'm renewing my license and getting a REAL ID. It says,

The original documents that were successfully uploaded for the REAL ID application are required at the time of your visit to complete the REAL ID application process.

I have my passport of course but for proof of residence, I uploaded PDFs that I downloaded from my utility providers. I don't receive paper anything in the mail, everything is online.

Can I bring in a copy or login to these accounts on my phone? Or do I need to call PG&E, etc., and ask them to mail me a paper copy?

12

r/HomeNetworking•

Background/Rant (feel free to skip)

I just had an electrician rewire my house with cat6 cable. I wanted to run a second line to some of the jacks myself before the drywall gets closed up on Thursday. I checked my local shops and their only cat6 cables were twisted strand OEM crap (Central Computers) and/or they only carried lengths up to 20' (Graybar), etc. So I placed an order on Monoprice based on the reputation on reddit, the website said it would arrive on Wednesday at the latest. I have a buddy who can help me run the wire Wednesday night if needed, it's only to a few spots, it shouldn't take more than an hour.

As I'm dependent on Monoprice shipping being on time, I had a chat wit

45