What does this switch do/what can I replace it with?
I know just enough about electronics to get myself in trouble, so please bear with me/ELI5. Here are a couple photos that may help clarify my issue:
My Ryobi light's switch has been getting progressively more moody as the years have gone by. Successive presses of the button are supposed to cycle the light from off, to fully on, to 1/2 the LEDs on, to the other 1/2 of the LEDs on, and back to off. the button now only works about 20% of the time, so I decided to fix it. I opened it up and verified that the switch on the small circuit board is the issue, not the mechanical connection to the button above. Pressing the switch directly only worked 20% of the time, while shorting out across the switch connections would cycle through the settings. Unfortunately replacement parts are not available.
I thought the switch was just a momentary switch sending a signal to the larger circuit board in the base of the light to cycle through the settings. I wired in a momentary switch, and when I hooked the battery back up, the light was always on and the switch did nothing. I cut the wires again, and the light is still always on.
The only thing on the small circuit board is the micro switch. The back of the board is completely smooth. Worst case scenario, I'll just wire an on/off toggle switch to one of the battery leads, but I'd rather be able to cycle through the settings as designed. Any help would be greatly appreciated!
ā
Posted Jan 22, 2024, 10:55 PM UTC