Hello everyone,
Just got into the hobby and thought i would make a post about my current setup (mostly so I can look back at it if I mess anything up)

Boring stuff

SA: Arm/Disarm
SB: Flight modes (tied this channel output to Airmode in betaflight so airmode is only on for acro)
SC: Rate Profiles (↑ Indoor / - Cruise / ↓ Freestyle).
SD: Turtle Mode (Setup in Betaflight Modes: 'Flip Over After Crash' and 'Arm' share the same range on this switch.)

The Adaptive S1 Pot

I didn't want a dedicated VTX knob taking up space indoors.

• Indoor Mode (SC↑): S1 becomes a Variable Throttle Limit. It scales the throttle top-end, giving me massive precision for proximity flying.
• Outdoor Mode (!SC↑): S1 becomes VTX Power Control.

(S1 shows up as SF in edgeTX)
CH3 (Throttle):

1. Source: Thr
2. Multiply Line: Operation: MULTIPLY | Source: SF | Switch: SC(↑) | Weight: 25 | Offset: 75
3. Offset Line: Operation: ADD | Source: SF | Switch: SC(↑) | Weight: 25 | Offset: -25

CH10 (VTX Control):

1. Source: SF | Switch: !SC(↑)
2. Cleanup Line: Operation: REPLACE | Source: CH10 | Switch: SC(↑) | Weight: 100 | Offset: 0

The OSD State Machine (SE Button)

Since SE is a momentary button, I turned it into a virtual 3-position toggle using Global Variables (GVs) to cycle through OSD Profiles. This is sent to Aux 8 to talk to the Betaflight Adjustments tab.

Logical Switches:

• L01-L03: a=x | G1 | (1, 2, or 3)
• L04: a=x | G1 | 4 (The "Reset" trigger)

Special Functions:

• SE(↓): Adjust G1 | +=1 (Increments on button press)
• L04: Adjust G1 | 1 (Resets counter back to 1)

Mixes (CH12 - Aux 8):

1. Source MAX | Weight -100 | Switch L01 | REPLACE
2. Source MAX | Weight 0 | Switch L02 | REPLACE
3. Source MAX | Weight 100 | Switch L03 | REPLACE

The Betaflight Setup (Adjustments Tab)

To make the OSD cycle work, go to the Adjustments tab in Betaflight:

1. Enable a slot.
2. Set Adjustment Selection to Aux 8.
3. Set Adjustment Function to OSD Profile Selection.
4. Now, every time you click SE on your Pocket, your OSD cycles between your three custom layouts!