Does this look like an infection?
Posted Dec 28, 2013, 4:50 PM UTC
715
Posted Dec 28, 2013, 4:50 PM UTC
Never had an infected batch before so I'm not sure. It's a porter that's been sitting in secondary for about 5 weeks. I added a few oz of oak chips 5 weeks ago, which I sanitized by soaking them in whiskey. I also added said whiskey.
Never seen bubbles on the surface after secondary so I'm a little concerned.
RDWHAHB or should I do anything before / instead of bottling..?
Doesn't look like anything to be worried about. How does it smell/taste?
Definitely contaminated.
It is infected, how long has it been there? It usually starts tasting like vinegar at around 3 weeks
Looks fine.
It does look infected. It's not the bubbles that concern me it's the scummy skin it looks like has formed. I'd try racking it off and leave the top inch or so. Take a sample and see how it tastes. If it tastes good bottle it.
It smells fine / smells like beer. Tastes good with a hint of whiskey aftertaste. Wife agreed and said she'd drink a bunch of it if it were cold and carbonated.
I'll rack underneath as you suggested and bottle. Thanks!
Should I use the normal amount of priming sugar I'd normally use for this style, or adjust in some way..?
If it tastes fine you could consider even racking it all. As you rack you could skim some with a sanitized shot glass or something similar and taste.
I'd go with the normal prime for your style, which for a porter should be somewhere between 4 and 5 oz for a 5 gal batch, if memory serves.
Let us know how it comes out.
I used 3oz guesstimating that I'd end up with about 4.25 gallons. Actually got 44 bottles (4.125 gallons), so I wasn't too far off. That was for a target of 2.1 volumes which was what a few calculators suggested.
I'll report back in a month or so. :)
Sounds about right I bottled my Wiezen last night with 5.5 oz for a full 5 gallon batch.
The picture is poor, but I think the skin is actually the texture of the carboy. OP, let us know if it has a waxy, scummy skin on the top of the beer.
I think you might be right looking at the photo a bit more carefully. If there are only bubbles, that is not per se abnormal for secondary. It would be slightly unusual and cause for further examination thoug.
No... surface looks how it normally looks with the exception of the several bubbles.
Great. It's most likely fine then. Out of curiosity, what yeast did you use?
Safale S-04