mrthedon

u/mrthedon


r/headphones•

I've found dozens upon dozens of dongles/adapters that can be used with wired headphones to transmit audio wirelessly via Bluetooth. The problem is that all of these attachments have their own built-in microphone, which takes priority over any mic on the headset. I don't want this. I like my headset's boom mic and want to continue using it.

Is there some kind of device that I can plug my headset into that will allow my to use the entire headset wirelessly with my computer?

13

r/Homebrewing•

Started boil with 8.25 gallons (measured at ~160F). Boiled for ????? minutes and now have 7 gallons (measured at ~200F). Just realized I ran out of propane, swapped, the tank, and I have several hop additions remaining beginning at the 15min before end of boil mark, but don't know how long to boil after returning to boiling temp.

Thoughts?

312

r/todoist•

I'm a fan of Todoist, but I'm a little disappointed about task alerts not persisting. What I mean is that if I create a task and tell it to remind me about it at X o'clock, I'll get the notification on my phone at that time (alert if unlocked, notification banner if locked) and have the option to acknowledge or snooze it (as expected).

However, if I turn the screen off, I won't see the alert again when I turn it back on, nor will it notify me again in <X> minutes to tell me that I haven't acknowledged or snoozed it. If I happen to be in the middle of doing something when I get the original alert and don't have time to deal with it until an hour or so later, I'm very likely to forget a

44

r/Homebrewing•

EDIT: argh, sorry! Title should be 2015 13B. Can't seem to edit on mobile app though. Brown and Biscuit in my version should be oz, not lbs. Fixed that.

Well, actually, it's a Northern English Brown Ale (2008 BJCP 11C) recipe. There aren't a lot of proven recipes for the 2015 categories floating around yet, but the description and stats for 2008 Northern English Brown Ale seemed pretty similar to those of the 2015 British Brown Ale, and I found a medal-winning recipe for it, so figured I'd give that a try!

The original recipe is:

5 Gallons, OG 1.056, FG 1.018, ABV 4.99%

8lb British Pale Ale
1lb Dextrin
2lb Crystal 75L
1lb Munich
0.5lb Brown
0.5lb Biscuit
4
14

r/Homebrewing•

I've got a pumpkin ale that just finished 3 weeks fermentation in a temperature controlled fridge. It's ready to be kegged, but the keezer is full and I won't have an empty keg available for another month probably.

Of course, I don't want to wait another couple of weeks before brewing again, and I'd need to use the fridge for the next beer.

Can I store my fermented ale in a dark, but warm place without negative consequences? Around 80F.

Also, while I don't typically transfer to secondary anymore unless I'm adding new fermentables, I'm wondering if I should transfer to another vessel to store it, or would another month on the yeast cake and pumpkin sludge be OK?

22

r/Homebrewing•

I sanitized 4oz of cacao nibs with 4oz of clear rum (the general recommendation had been to use vodka, but I didn't have any, and I read that clear rum was an acceptable substitute), and then added both the nibs and the rum to a keg and racked the porter on top of it. It's been "set-and-forget" carbing for a couple of weeks and I tasted it yesterday.

It tastes great, but I can sort of taste the rum as part of the aftertaste (BJCP scoresheet would describe it as "warming effect of ethanol and higher alcohols.") Hydrometer readings (before adding the rum) showed an ABV of 5.6%, and the rum should have added another 0.2% or so for a total of 5.8%.

Was including the rum (or using rum in the fi

26

r/Homebrewing•

I have a dual gauge taprite regulator I bought not too long ago. I'm kegging my second beer and using the second gauge for the first time.

I turned the adjustment knob to gradually increase pressure. It made it to about 15psi and then stopped increasing despite me continuing to turn the knob. Suddenly I hear a massive leak and turn everything off. After taking the whole assembly out of the keezer, it seems the leak is coming from under the assembly out of what I think is some kind of safety release (it looks like the lid of a pinlock keg where a ball lock would normally have the pressure release pin).

Anyway, now the second gauge won't go above ~3psi. Any higher and the safety valve starts

05

r/Homebrewing•

I've got a Hefeweizen on the tail end of primary fermentation that I was planning to add some watermelon to. At this point I'm leaning towards putting a few lbs of watermelon chunks in a grain bag and racking onto it for a ~1wk secondary* fermentation, but am open to any suggestions. Anybody have any experience with this? How much watermelon should I use? I'm looking for obvious watermelon flavor without being too overpowering / dominating.

* I don't normally do secondary anymore but since there would actually be new fermentables added I think it'd make sense, no? I'll be purging the secondary carboy with co2 to reduce the risk of oxidation.

147

r/Homebrewing•

I entered an extract Black Imperial IPA as a Specialty Beer in my first homebrew competition a few weeks back and just got the scoresheets. It didn't win a medal, but scored a 37/50 and made it to the second round of judging.

I'd like to use the judges' feedback to refine the recipe and brew it as an all-grain (BIAB) for next time to bring home some gold! Help? :)

The Original Recipe

Fermentables:  
9.15 lbs Golden Light LME
1 lb Dextrose at flameout

Steeping Grains:
.75 lb Carafa III
.5 lb Chocolate Malt
.5 lb Caramel Malt 60L
1 lb 2-row pale

Hop Schedule:
1oz Magnum @ 60min
1oz Cascade @ 30min
2oz Cascade @ 10min
1oz Columbus @
25

r/Homebrewing•

When doing my first couple of BIABs, I've previously always added my entire needed volume of water pre-mash, mashed, then heated the contents of the kettle to 170F for mashout. (No sparge)

I just learned / realized can also just dump 3 gallons of boiling water into the mash to rise up to 170F almost immediately (duh).

Is one method, in terms of achieving higher efficiency, necessarily better than the other? I've gotten around 75% efficiency the past couple of brews and would like to try the latter method next time if so.

Mash thickness would be 3.597qt/lb and 2.51qt/lb, respectively.

216

r/askcarsales•

My 2000 Nissan Maxima GLE (V6, automatic, leather interior, retractable sunroof) with about 140,000 miles on it has an ECM malfunction combined with a bad idle air control valve that a trusted mechanic told me would cost $1,200 to repair. That was the bare minimum to get it driving again, but there were a few other valid "you should really take care of this soon" items that would cost another several hundred.

I knew this day would come eventually so I had been saving for a while and already replaced it. Now I need to sell the Maxima.

KBB shows a Good ($1,772) and Fair ($1,297) value for Trade-In and Good ($2,745) and Fair ($2,345) value for Private Party. In my not-a-professional-appraiser

48

r/legaladvice•

I received a citation for "following too closely" after rear-ending a car that had stopped suddenly in response to the car in front of it stopping suddenly. It had also been raining for a while that day, so the streets were wet.

I do not believe I was following too closely, but I was in my wife's car, whose brakes and tires are apparently not as great as those in my car. I am certain I could have stopped with plenty of room to spare in my normal daily driver.

No injuries to any party involved and my insurance company has already paid for all damages.

That said, I am contesting the ticket and have a pretrial hearing coming up. The statute is 315.0895(1), which reads: "The driver of a motor

016

r/Homebrewing•

I'm planning on building a keezer but will have to get rid of my small fermentation fridge to make room for it.

What I'd like to do is get a freezer big enough to hold a 6-gallon PET carboy in addition to my kegs and use that for fermenting new beers. Obviously I won't be able to ferment ales at proper beer serving temperatures, but I imagine brewers in cold climates who ferment in cellars/basements/garages and whatnot have to deal with keeping their carboys warm in close to freezing temperatures.

Has anybody use their keezer for serving and fermenting at the same time? If so, how?

55