Prusa Connect: Delay start an already queued print?
This would be a great enhancement to Prusa Connect IMO. If it's already possible and I'm just daft, please advise.
I'm running a lot of ABS-GF with my enclosed MK4S. Before each print I want to heat soak for the 30min max before starting. Most of these are run overnight/during the work day and not immediately sequential, and my queue is 5-10 items long ongoing.
At present I set bed to 100C, delete the next queued print, find it in storage, then delay start in 30min.
One or more of the below would be more ideal:
- a 'Delay Set Ready' button where the machine would be automatically be set to Ready after a time interval and begins the next queued print.
- the ability to select an already queued print and set a delayed start from the queue.
- a "Preheat and Begin" option which preheats the bed at a suitable temp for the filament for the max allowable heat time, then begins.
I realise functions like this can be achieved with Start GCode to a degree, but it would be handy to have it baked into Connect so you don't need to define it at slice time.
I also realise this isn't something the Core machines run into as from what I understand they already have heatsoak procedures built in.
Posted Sep 17, 2026, 4:51 AM UTC