idsan

u/idsan


r/prusa3d•

This would be a great enhancement to Prusa Connect IMO. If it's already possible and I'm just daft, please advise.

I'm running a lot of ABS-GF with my enclosed MK4S. Before each print I want to heat soak for the 30min max before starting. Most of these are run overnight/during the work day and not immediately sequential, and my queue is 5-10 items long ongoing.

At present I set bed to 100C, delete the next queued print, find it in storage, then delay start in 30min.

One or more of the below would be more ideal:

- a 'Delay Set Ready' button where the machine would be automatically be set to Ready after a time interval and begins the next queued print.

- the ability to select an alr

24

r/Fusion360•

I've noticed every time I change shortcut keys, Fusion opens back up again with the defaults. It didn't used to do this.

I've found forum threads like this one that report similar things with no recommended fix. The Autodesk reps replying also seem.. obtuse, at best.

Logging in and out does nothing, reinstalling does nothing. It doesn't seem like a user customisation issue either. Keymaps are just set back to default on close.

Has anyone run into this and/or know of a reliable solution?

60

r/prusa3d•

Just got the worst ASA clog of a lifetime due to my new Glacier bed having what looks like an uneven powdercoat on the surface, making the print surface too close to the nozzle where the part was being printed.

Stupidly I didn't get any photos, but has anyone else run into having to manually tune Z-offset for these plates? Shouldn't have to ideally, not with loadcell probing.

I guess I'll have to go back to the hope-and-raindance routine to prevent ASA warp.

18

r/VORONDesign•

I probably won't go this far, but my WIP Trident toolchanger currently has a theoretical maximum of 9 frame-mounted steppers:

3x Z motors, 4x XY motors in AWD config, 2x liftbar motors for a mobile tool rack.

As I understand my options are:

  1. Run the machine from 2x MCU boards (eg Manta M8P + M4P), with the M4P running the toolbar motors.

  2. Just go 2WD as it's a toolchanger head and will likely be less rigid than is required for AWD. I'm considering this but I'd like the ability to change out the toolhead in future for a standard one and run it as a speed machine.

  3. Put 2x EBB boards in the electronics bay and run the liftbar motors from them. Is this feasible? I'm assuming that

640

r/VORONDesign•

I'm designing a custom Trident from the ground up, and so far the only vendor I've found who sells the 8mm cast heatbed plates as a standalone item is Mellow.

Does anyone have feedback on their quality, or if there are any others readily available?

Obviously mobs like Fysetc and Formbot source them for their kits but I haven't seen them list it as a separate product.

618

r/AskEngineers•

I ask this in the context of LED lights and lab power supplies, mostly.

I understand they vary their output voltage to the load in order to maintain a constant current, hence why multiple LEDs need to be serially connected (as long as you don't exceed their specified forward voltage and let the magic smoke out).. What I don't understand is the mechanism by which the current is forced to be constant.

723

r/SatisfactoryGame•

I haven't played in a bit, but this was always a bugbear for me.

It's easy to upgrade belts and miners and then divert the extra resource for another use if needed.

But if we take upgrading out of the equation, what's the best approach to deciding how much of a given resource to use for a given product? Because once the node output is assigned to make a given product it's hard to divert it elsewhere for another use and still maintain some semblance of efficiency.

If I'm foolish and just not trying hard enough, point that out too.

39


r/pcmasterrace•

Hoping someone has had a similar experience, because Googling hasn't turned up a lot for me. My Ryzen 5800X / ASUS TUF 3090 OC machine, built in early 2021, will stutter and lag the Windows interface (or game framerate) for 2-3 seconds every session. Usually only happens once in ~4hrs, sometimes twice.

There had been isolated incidents of artifacting in Windows a few months ago which a total driver wipe and reinstall seemed to fix. I know artifacting usually points to a dying GPU; I could assume it's that, but given the lack of other issues and the fact it went away, that doesn't sit right with me.

Has anyone else come across this intermittent stutter before? GPU doesn't have to be un

21