Question related to fluid dynamics, specifically regarding heat transference and copper tubing wall thickness.

I am building a prototype cooling element, which requires a length of coiled copper tubing. Much like a immersion chiller, but will be cooling ambient air, rather than liquid. It will be moving type r134a refrigerant throughout the piping system. My question is, what would be the optimum wall thickness to use when selecting copper tubing, in order to achieve maximum heat transfer to the coil? I'm assuming there is a way to calculate the specific wall thickness (which must be strong enough to contain up to 100psi of refigerant pressure), that will allow for optimum heat transfer. If any other information is needed, please let me know and I will provide what information I can. Also, are there any other materials that may be better suited for this application? Thanks

Posted Jul 18, 2016, 7:55 PM UTC

12
tcelesBhsup•

What is the purpose? I think you'll find that drawn copper is exceptionally difficult and expensive to make yourself, best to just buy whatever you can find cheap that won't explode. Oh and watch the thermal expansion on your joints, braze don't solder!

Refrigerator/Icemaker lines I think are the cheapest soft drawn copper that could support refrigerant ( a typical 134A systems runs higher than 100 PSI btw, depends on the heat load but your system better handle 250 in case of an overheat scenario).

2
monkey_prick•

As thin as possible

1