[Physics E & M] Average Power of AC Circuit

I can't get this problem right, and I only have one attempt left.

http://imgur.com/a/mvMsQ

I have tried equations: Pav = IrmsVrms, P=Vrms^2 / R

But, nothing yields me the right answer. What is the right answer with the proper equation and numbers to find/use?

Posted Mar 11, 2017, 12:22 AM UTC

15
abdex•

Average power for AC circuits is not simple because V and I are not in phase with each other. I haven't done the work for your problem, but here's a page that explains the procedure: http://www.electronics-tutorials.ws/accircuits/power-in-ac-circuits.html

2
diodesnstuff•

Your equations are correct, but your usage of them went wrong somewhere. 120Vrms^2 / (20.0+39.0)Ω = 244.07W or 120Vrms / (20.0+39.0)Ω = 2.03A rms 2.03A * 120V = 244.07W

1
SiniticOP•

That wasn't the right answer...it was 75W.

Do you have any idea why?

1
diodesnstuff•

Sorry about that. I can see where I went wrong, mistaking reactance for impedance, but even when I correct that I'm not getting an answer anywhere near as low as 75W.

1
ab3ju•

Because apparently those aren't RMS voltages. If they were, the answer would be P=Re(120^(2)/(20-j39))=150.

1