Looking for restaurants that have lobster served specifically peppery-salt deep fried. We usually go to Happy Day Cafe for this style, but was wondering if anyone knows of any other places that also do this dish.
Sinitic
u/Sinitic
Did anyone notice how the scanners on campus switched their software? Now every time I scan my homework, it shows some over-saturated faux scan which renders my writing unreadable.
Anyone know a way to switch the setting on the scanner so that it is able to scan like before?
I'm getting this bug where, when plotting two arrays, I have negative x-values, despite there not being any negative values in my x-axis array. My x-axis should range from my minimum 0.005 to my max 0.995. There shouldn't be any values defined outside this range. Why am I getting I'm not sure why this is happening?
Picture of code here: https://imgur.com/sixJBTt
I'm having trouble how to go about this problem. I don't understand the procedure I'm supposed to take to even begin/solve. I was told to draw timing diagrams, but I'm not sure how I'm supposed to when I have to factor in both gate delays, Thold, Tsetup, and clk -> Q. What is the right procedure to draw the timing diagram necessary to go about this problem; can anyone draw one out possibly so that I can get an idea of how to?
I'm confused about how Vc for t<0 is calculated.
I don't understand the 70V calculation. Can someone draw this out? When I did so, I was able to collapse everything into the 100V source and the resistor. I calculated Vc as taking the full 100V as a result, as is in parallel with the voltage source. I don't visually understand the calculation they arrived at?
I only need help with part (a) of this problem. https://imgur.com/a/zEVxB
The answers are iL(0+)=0 and vL(0+)=24. These confuse me as to why they are. Because vC(0+)=24V, how can vL(0+)=24V as well? These elements are in series with each other, and added together, are 48V, which clearly isn't possible as the voltage source was initially 24V. I don't understand the reasoning?
For iL(0+), wouldn't the capacitor begin discharging, therefore we would see some nonzero current go through the inductor?
I'm getting this question wrong, and I don't understand why.
I solved for x2 in both cases, to get the slope of each equation, which were (6/7) and (-9/k) respectively. I set the two equal to each other, knowing parallel lines were not consistent, to obtain k=-63/6. I also knew k=0 would not make sense per a 0 denominator.
I'm also getting this question wrong:
For the same reasoning; except I applied the end reasoning to solve for as if they were the same exact line (y-intercept + slope)
I can't solve this problem, and I'm not sure how to given the set of given variables.
I used Bernoulli's, and set the reference points at the horizontal plane of the water and oil interface.
Patm + ρghwater = Patm + ρghoil
1 + (1000)(9.8)(0.5 + x) = 1 + (820)(9.8)(h???)
I don't know how to set up this equation.
I can't get this problem right, and I only have one attempt left.
I have tried equations: Pav = IrmsVrms, P=Vrms^2 / R
But, nothing yields me the right answer. What is the right answer with the proper equation and numbers to find/use?
I don't understand how to solve this question. Why is my answer wrong?
I thought that the reference frame of one particle, being that that frame is at rest, simply sees the other particle as moving at .760c0. I also applied an equation (not sure if was relevant): v^2 / c^2 = (1 - 1/y^2 ) and received the same answer of .760c0
The question: http://imgur.com/EEE0oTw
My work: https://imgur.com/UUiSO3z
My answer is wrong for some reason, and i dont understand why. I found E, then plugged into the Force equation.
I'm getting this question wrong, and I don't understand why:
I calculated this knowing that at the equilibrium moment, Fe = Fg. Therefore, Fe=mg. So, I calculated .160g * 9.8m/s^2 = 1.6N . However, it is marked wrong.
I'm not getting this question right, and I don't understand why.
http://i.imgur.com/8RZnjpj.png
I use the ratio test and find that |x|<1/sqrt(2); I even plugged it into WolframAlpha afterwards. What am I doing wrong?
I'm not sure how to solve this problem. I tried expanding each of the summations, but I'm not sure how to exactly rewrite to fit it into the form that it asks for.
I'm getting this question wrong, and I don't understand why:
Is this an algebraic mistake? I'm using the formula f(b) + f'(b)(x-b)+[f''(b)(x-b)^2 ]/2